|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v3] Hvmloader: Modify ACPI to only supply _EJ0 methods for PCIslots that support hotplug by runtime patching
Hi, all > -----Original Message----- > From: Michael S. Tsirkin [mailto:mst@xxxxxxxxxx] > Sent: Thursday, May 08, 2014 4:15 AM > To: Konrad Rzeszutek Wilk > Cc: Gonglei (Arei); qemu-devel@xxxxxxxxxx; xen-devel@xxxxxxxxxxxxx; > Huangweidong (C); Ian.Campbell@xxxxxxxxxx; stefano.stabellini@xxxxxxxxxxxxx; > Hanweidong (Randy); fabio.fantoni@xxxxxxx; JBeulich@xxxxxxxx; > anthony.perard@xxxxxxxxxx; Gaowei (UVP) > Subject: Re: [Xen-devel] [PATCH v3] Hvmloader: Modify ACPI to only supply _EJ0 > methods for PCIslots that support hotplug by runtime patching > > On Wed, May 07, 2014 at 02:48:48PM -0400, Konrad Rzeszutek Wilk wrote: > > On Sun, May 04, 2014 at 05:25:15PM +0800, arei.gonglei@xxxxxxxxxx > wrote: > > > From: Gaowei <gao.gaowei@xxxxxxxxxx> > > > > > > In Xen platform, after using upstream qemu, the all of pci devices will > > > show > > > hotplug in the windows guest. In this situation, the windows guest may > occur > > > blue screen when VM' user click the icon of VGA card for trying unplug VGA > card. > > > However, we don't hope VM's user can do such dangerous operation, and > showing > > > all pci devices inside the guest OS is unfriendly. > > > > > > This is done by runtime patching: > > > - Rename _EJ0 methods for PCI slots in DSDT to EJ0_:note that this has > the > > > same checksum, but is ignored by OSPM. > > > - At compile time, look for these methods in ASL source,find the > matching AML, > > > and store the offsets of these methods in a table named > aml_ej0_data. > > > - At run time, go over aml_ej0_data, check which slots not support > hotplug and > > > patch the ACPI table, replacing _EJ0 with EJ0_. > > > > How does this work with traditional QEMU ? Is this only when running with > SeaBIOS and upstream QEMU? > > The traditional QEMU is unaffected and works fine as normal. Yes, it is only useful With seabios and upstream QEMU. > > > > > > Signed-off-by: Gaowei <gao.gaowei@xxxxxxxxxx> > > > Signed-off-by: Gonglei <arei.gonglei@xxxxxxxxxx> > > > --- > > > v3->v2: > > > reformat on the latest master > > > v2->v1: > > > rework by Jan Beulich's suggestion: > > > - adjust the code style > > > > > > tools/firmware/hvmloader/acpi/Makefile | 44 ++- > > > tools/firmware/hvmloader/acpi/acpi2_0.h | 4 + > > > tools/firmware/hvmloader/acpi/build.c | 22 ++ > > > tools/firmware/hvmloader/acpi/dsdt.asl | 1 + > > > tools/firmware/hvmloader/acpi/mk_dsdt.c | 2 + > > > tools/firmware/hvmloader/ovmf.c | 6 +- > > > tools/firmware/hvmloader/rombios.c | 4 + > > > tools/firmware/hvmloader/seabios.c | 8 + > > > tools/firmware/hvmloader/tools/acpi_extract.py | 308 > +++++++++++++++++++++ > > > .../hvmloader/tools/acpi_extract_preprocess.py | 41 +++ > > > 10 files changed, 428 insertions(+), 12 deletions(-) > > > create mode 100644 tools/firmware/hvmloader/tools/acpi_extract.py > > > create mode 100644 > tools/firmware/hvmloader/tools/acpi_extract_preprocess.py > > > > > > diff --git a/tools/firmware/hvmloader/acpi/Makefile > b/tools/firmware/hvmloader/acpi/Makefile > > > index 2c50851..f79ecc3 100644 > > > --- a/tools/firmware/hvmloader/acpi/Makefile > > > +++ b/tools/firmware/hvmloader/acpi/Makefile > > > @@ -24,30 +24,46 @@ OBJS = $(patsubst %.c,%.o,$(C_SRC)) > > > CFLAGS += $(CFLAGS_xeninclude) > > > > > > vpath iasl $(PATH) > > > +vpath python $(PATH) > > > + > > > +.DELETE_ON_ERROR:$(filter dsdt_%.c,$(C_SRC)) > > > + > > > all: acpi.a > > > > > > ssdt_s3.h ssdt_s4.h ssdt_pm.h ssdt_tpm.h: %.h: %.asl iasl > > > iasl -vs -p $* -tc $< > > > - sed -e 's/AmlCode/$*/g' $*.hex >$@ > > > + sed -e 's/AmlCode/$*/g' $*.hex >$@.tmp > > > + $(call move-if-changed,$@.tmp $@) > > > rm -f $*.hex $*.aml > > > > > > mk_dsdt: mk_dsdt.c > > > $(HOSTCC) $(HOSTCFLAGS) $(CFLAGS_xeninclude) -o $@ mk_dsdt.c > > > > > > dsdt_anycpu_qemu_xen.asl: dsdt.asl mk_dsdt > > > - awk 'NR > 1 {print s} {s=$$0}' $< > $@ > > > - ./mk_dsdt --dm-version qemu-xen >> $@ > > > + awk 'NR > 1 {print s} {s=$$0}' $< > $@.tmp > > > + sed -i 's/AmlCode/dsdt_anycpu_qemu_xen/g' $@.tmp > > > + ./mk_dsdt --dm-version qemu-xen >> $@.tmp > > > + sed -i 's/aml_ej0_name/dsdt_anycpu_qemu_xen_aml_ej0_name/g' > $@.tmp > > > + sed -i 's/aml_adr_dword/dsdt_anycpu_qemu_xen_aml_adr_dword/g' > $@.tmp > > > + $(call move-if-changed,$@.tmp $@) > > > > > > # NB. awk invocation is a portable alternative to 'head -n -1' > > > dsdt_%cpu.asl: dsdt.asl mk_dsdt > > > - awk 'NR > 1 {print s} {s=$$0}' $< > $@ > > > - ./mk_dsdt --maxcpu $* >> $@ > > > + awk 'NR > 1 {print s} {s=$$0}' $< > $@.tmp > > > + sed -i 's/AmlCode/dsdt_$*cpu/g' $@.tmp > > > + ./mk_dsdt --maxcpu $* >> $@.tmp > > > + $(call move-if-changed,$@.tmp $@) > > > > > > -$(filter dsdt_%.c,$(C_SRC)): %.c: iasl %.asl > > > - iasl -vs -p $* -tc $*.asl > > > - sed -e 's/AmlCode/$*/g' $*.hex >$@ > > > - echo "int $*_len=sizeof($*);" >>$@ > > > - rm -f $*.aml $*.hex > > > +$(filter dsdt_%.c,$(C_SRC)): %.c: iasl python %.asl > > > + cpp -P $*.asl > $*.asl.i.orig > > > + python ../tools/acpi_extract_preprocess.py $*.asl.i.orig > $*.asl.i > > > + iasl -vs -l -tc -p $* $*.asl.i > > > + python ../tools/acpi_extract.py $*.lst > $@.tmp > > > + echo "int $*_len=sizeof($*);" >>$@.tmp > > > + if grep -q "$*_aml_ej0_name" $@.tmp; then echo "int > $*_aml_ej0_name_len=sizeof($*_aml_ej0_name);" >>$@.tmp; fi > > > + if grep -q "$*_aml_adr_dword" $@.tmp; then echo "int > $*_aml_adr_dword_len=sizeof($*_aml_adr_dword);" >>$@.tmp;fi > > > + $(call move-if-changed,$@.tmp $@) > > > + rm -f $*.aml $*.hex $*.asl.i.orig $*.asl.i $*.lst > > > > > > iasl: > > > @echo > > > @@ -57,6 +73,12 @@ iasl: > > > @echo > > > @exit 1 > > > > > > +python: > > > + @echo > > > + @echo "python is needed" > > > + @echo > > > + @exit 1 > > > + > > > build.o: ssdt_s3.h ssdt_s4.h ssdt_pm.h ssdt_tpm.h > > > > > > acpi.a: $(OBJS) > > > @@ -64,7 +86,7 @@ acpi.a: $(OBJS) > > > > > > clean: > > > rm -rf *.a *.o $(IASL_VER) $(IASL_VER).tar.gz $(DEPS) > > > - rm -rf ssdt_*.h dsdt*.c *~ *.aml *.hex mk_dsdt dsdt_*.asl > > > + rm -rf ssdt_*.h dsdt*.c *~ *.aml *.hex mk_dsdt dsdt_*.asl *.asl.i > *.asl.i.orig *.lst *.tmp > > > > > > install: all > > > > > > diff --git a/tools/firmware/hvmloader/acpi/acpi2_0.h > b/tools/firmware/hvmloader/acpi/acpi2_0.h > > > index 7b22d80..4ba3957 100644 > > > --- a/tools/firmware/hvmloader/acpi/acpi2_0.h > > > +++ b/tools/firmware/hvmloader/acpi/acpi2_0.h > > > @@ -396,6 +396,10 @@ struct acpi_config { > > > int dsdt_anycpu_len; > > > unsigned char *dsdt_15cpu; > > > int dsdt_15cpu_len; > > > + unsigned short *aml_ej0_name; > > > + unsigned short *aml_adr_dword; > > > + int aml_ej0_name_len; > > > + int aml_adr_dword_len; > > > }; > > > > > > void acpi_build_tables(struct acpi_config *config, unsigned int > > > physical); > > > diff --git a/tools/firmware/hvmloader/acpi/build.c > b/tools/firmware/hvmloader/acpi/build.c > > > index f1dd3f0..ccce420 100644 > > > --- a/tools/firmware/hvmloader/acpi/build.c > > > +++ b/tools/firmware/hvmloader/acpi/build.c > > > @@ -30,6 +30,8 @@ > > > #define align16(sz) (((sz) + 15) & ~15) > > > #define fixed_strcpy(d, s) strncpy((d), (s), sizeof(d)) > > > > > > +#define PCI_RMV_BASE 0xae0c > > > + > > > extern struct acpi_20_rsdp Rsdp; > > > extern struct acpi_20_rsdt Rsdt; > > > extern struct acpi_20_xsdt Xsdt; > > > @@ -404,6 +406,8 @@ void acpi_build_tables(struct acpi_config *config, > unsigned int physical) > > > unsigned char *dsdt; > > > unsigned long > secondary_tables[ACPI_MAX_SECONDARY_TABLES]; > > > int nr_secondaries, i; > > > + unsigned int rmvc_pcrm = 0; > > > + unsigned int len_aml_addr = 0, len_aml_ej0 = 0; > > > > > > /* Allocate and initialise the acpi info area. */ > > > mem_hole_populate_ram(ACPI_INFO_PHYSICAL_ADDRESS >> > PAGE_SHIFT, 1); > > > @@ -440,6 +444,24 @@ void acpi_build_tables(struct acpi_config *config, > unsigned int physical) > > > memcpy(dsdt, config->dsdt_anycpu, config->dsdt_anycpu_len); > > > nr_processor_objects = HVM_MAX_VCPUS; > > > } > > > + len_aml_addr = > config->aml_adr_dword_len/sizeof(config->aml_adr_dword[0]); > > > + len_aml_ej0 = > config->aml_ej0_name_len/sizeof(config->aml_ej0_name[0]); > > > + if (config->aml_adr_dword_len && config->aml_ej0_name_len && > (len_aml_addr == len_aml_ej0)) > > > + { > > > + rmvc_pcrm = inl(PCI_RMV_BASE); > > > > > > So .. what is at this special 0xae0c address? > > > > Is there some code in QEMU that needs this treatment as well? > > Yep, the 0xae0c is defined in upstream QEMU, which show the hotplugging ability of PCI devices. Including other special address about acpi hotplug defined in hw/acpi/pcihp.c: #define ACPI_PCI_HOTPLUG_STATUS 2 #define ACPI_PCIHP_ADDR 0xae00 #define ACPI_PCIHP_SIZE 0x0014 #define ACPI_PCIHP_LEGACY_SIZE 0x000f #define PCI_UP_BASE 0x0000 #define PCI_DOWN_BASE 0x0004 #define PCI_EJ_BASE 0x0008 #define PCI_RMV_BASE 0x000c #define PCI_SEL_BASE 0x0010 > > > + printf("rmvc_pcrm is %x\n", rmvc_pcrm); > > > + for (i = 0; i < len_aml_addr; i++ ) { > > > + /* Slot is in byte 2 in _ADR */ > > > + unsigned char slot = dsdt[config->aml_adr_dword[i] + 2] & > 0x1F; > > > + /* Sanity check */ > > > + if (memcmp(dsdt + config->aml_ej0_name[i], "_EJ0", 4)) { > > > + goto oom; > > > + } > > > + if (!(rmvc_pcrm & (0x1 << slot))) { > > > + memcpy(dsdt + config->aml_ej0_name[i], "EJ0_", 4); > > > + } > > > + } > > > + } > > > > > > /* > > > * N.B. ACPI 1.0 operating systems may not handle FADT with > revision 2 > > > diff --git a/tools/firmware/hvmloader/acpi/dsdt.asl > b/tools/firmware/hvmloader/acpi/dsdt.asl > > > index 247a8ad..1e7695b 100644 > > > --- a/tools/firmware/hvmloader/acpi/dsdt.asl > > > +++ b/tools/firmware/hvmloader/acpi/dsdt.asl > > > @@ -16,6 +16,7 @@ > > > * this program; if not, write to the Free Software Foundation, Inc., 59 > Temple > > > * Place - Suite 330, Boston, MA 02111-1307 USA. > > > */ > > > +ACPI_EXTRACT_ALL_CODE AmlCode > > > > > > DefinitionBlock ("DSDT.aml", "DSDT", 2, "Xen", "HVM", 0) > > > { > > > diff --git a/tools/firmware/hvmloader/acpi/mk_dsdt.c > b/tools/firmware/hvmloader/acpi/mk_dsdt.c > > > index a4b693b..555e062 100644 > > > --- a/tools/firmware/hvmloader/acpi/mk_dsdt.c > > > +++ b/tools/firmware/hvmloader/acpi/mk_dsdt.c > > > @@ -372,7 +372,9 @@ int main(int argc, char **argv) > > > /* hotplug_slot */ > > > for (slot = 1; slot <= 31; slot++) { > > > push_block("Device", "S%i", slot); { > > > + printf("ACPI_EXTRACT_NAME_DWORD_CONST > aml_adr_dword\n"); > > > stmt("Name", "_ADR, %#06x0000", slot); > > > + printf("ACPI_EXTRACT_METHOD_STRING > aml_ej0_name\n"); > > > push_block("Method", "_EJ0,1"); { > > > stmt("Store", "ShiftLeft(1, %#06x), B0EJ", slot); > > > stmt("Return", "0x0"); > > > diff --git a/tools/firmware/hvmloader/ovmf.c > b/tools/firmware/hvmloader/ovmf.c > > > index 28dd7bc..ea11564 100644 > > > --- a/tools/firmware/hvmloader/ovmf.c > > > +++ b/tools/firmware/hvmloader/ovmf.c > > > @@ -123,7 +123,11 @@ static void ovmf_acpi_build_tables(void) > > > .dsdt_anycpu = dsdt_anycpu, > > > .dsdt_anycpu_len = dsdt_anycpu_len, > > > .dsdt_15cpu = NULL, > > > - .dsdt_15cpu_len = 0 > > > + .dsdt_15cpu_len = 0, > > > + .aml_ej0_name = NULL, > > > + .aml_adr_dword = NULL, > > > + .aml_ej0_name_len = 0, > > > + .aml_adr_dword_len = 0, > > > }; > > > > > > acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS); > > > diff --git a/tools/firmware/hvmloader/rombios.c > b/tools/firmware/hvmloader/rombios.c > > > index 810bd24..803c9fa 100644 > > > --- a/tools/firmware/hvmloader/rombios.c > > > +++ b/tools/firmware/hvmloader/rombios.c > > > @@ -179,6 +179,10 @@ static void rombios_acpi_build_tables(void) > > > .dsdt_anycpu_len = dsdt_anycpu_len, > > > .dsdt_15cpu = dsdt_15cpu, > > > .dsdt_15cpu_len = dsdt_15cpu_len, > > > + .aml_ej0_name = NULL, > > > + .aml_adr_dword = NULL, > > > + .aml_ej0_name_len = 0, > > > + .aml_adr_dword_len = 0, > > > }; > > > > > > acpi_build_tables(&config, ACPI_PHYSICAL_ADDRESS); > > > diff --git a/tools/firmware/hvmloader/seabios.c > b/tools/firmware/hvmloader/seabios.c > > > index dd7dfbe..ca01d27 100644 > > > --- a/tools/firmware/hvmloader/seabios.c > > > +++ b/tools/firmware/hvmloader/seabios.c > > > @@ -33,6 +33,10 @@ > > > > > > extern unsigned char dsdt_anycpu_qemu_xen[]; > > > extern int dsdt_anycpu_qemu_xen_len; > > > +extern unsigned short dsdt_anycpu_qemu_xen_aml_ej0_name[]; > > > +extern unsigned short dsdt_anycpu_qemu_xen_aml_adr_dword[]; > > > +extern int dsdt_anycpu_qemu_xen_aml_ej0_name_len; > > > +extern int dsdt_anycpu_qemu_xen_aml_adr_dword_len; > > > > > > struct seabios_info { > > > char signature[14]; /* XenHVMSeaBIOS\0 */ > > > @@ -99,6 +103,10 @@ static void seabios_acpi_build_tables(void) > > > .dsdt_anycpu_len = dsdt_anycpu_qemu_xen_len, > > > .dsdt_15cpu = NULL, > > > .dsdt_15cpu_len = 0, > > > + .aml_ej0_name = dsdt_anycpu_qemu_xen_aml_ej0_name, > > > + .aml_adr_dword = dsdt_anycpu_qemu_xen_aml_adr_dword, > > > + .aml_ej0_name_len = > dsdt_anycpu_qemu_xen_aml_ej0_name_len, > > > + .aml_adr_dword_len = > dsdt_anycpu_qemu_xen_aml_adr_dword_len, > > > }; > > > > > > acpi_build_tables(&config, rsdp); > > > diff --git a/tools/firmware/hvmloader/tools/acpi_extract.py > b/tools/firmware/hvmloader/tools/acpi_extract.py > > > new file mode 100644 > > > index 0000000..ccec089 > > > --- /dev/null > > > +++ b/tools/firmware/hvmloader/tools/acpi_extract.py > > > @@ -0,0 +1,308 @@ > > > +#!/usr/bin/python > > > +# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@xxxxxxxxxx> > > > +# > > > +# This file may be distributed under the terms of the GNU GPLv3 license. > > > > Well, Xen code is under GPLv2 so I don't think you can do this? > > > > Unless Michael is willing to release it under a different licence? > > I'd be fine with "GPLv2 or later" so code can flow back to seabios > as well - but you will have to track down everyone else who > changed this file since I wrote it and get their permission. > Thanks, Michael. I search the git log of above two python files, and find two person has changed those two files, Johannes and Kevin. CC'ing Johannes and Kevin for their permission, which using those two files in Xen code. Thanks in advance! CC'ing seabios maillist too. Best regards, -Gonglei > > > + > > > +# Process mixed ASL/AML listing (.lst file) produced by iasl -l > > > +# Locate and execute ACPI_EXTRACT directives, output offset info > > > +# > > > +# Documentation of ACPI_EXTRACT_* directive tags: > > > +# > > > +# These directive tags output offset information from AML for BIOS > runtime > > > +# table generation. > > > +# Each directive is of the form: > > > +# ACPI_EXTRACT_<TYPE> <array_name> <Operator> (...) > > > +# and causes the extractor to create an array > > > +# named <array_name> with offset, in the generated AML, > > > +# of an object of a given type in the following <Operator>. > > > +# > > > +# A directive must fit on a single code line. > > > +# > > > +# Object type in AML is verified, a mismatch causes a build failure. > > > +# > > > +# Directives and operators currently supported are: > > > +# ACPI_EXTRACT_NAME_DWORD_CONST - extract a Dword Const object > from Name() > > > +# ACPI_EXTRACT_NAME_WORD_CONST - extract a Word Const object > from Name() > > > +# ACPI_EXTRACT_NAME_BYTE_CONST - extract a Byte Const object from > Name() > > > +# ACPI_EXTRACT_METHOD_STRING - extract a NameString from > Method() > > > +# ACPI_EXTRACT_NAME_STRING - extract a NameString from Name() > > > +# ACPI_EXTRACT_PROCESSOR_START - start of Processor() block > > > +# ACPI_EXTRACT_PROCESSOR_STRING - extract a NameString from > Processor() > > > +# ACPI_EXTRACT_PROCESSOR_END - offset at last byte of Processor() + 1 > > > +# ACPI_EXTRACT_PKG_START - start of Package block > > > +# > > > +# ACPI_EXTRACT_ALL_CODE - create an array storing the generated AML > bytecode > > > +# > > > +# ACPI_EXTRACT is not allowed anywhere else in code, except in > comments. > > > + > > > +import re; > > > +import sys; > > > +import fileinput; > > > + > > > +aml = [] > > > +asl = [] > > > +output = {} > > > +debug = "" > > > + > > > +class asl_line: > > > + line = None > > > + lineno = None > > > + aml_offset = None > > > + > > > +def die(diag): > > > + sys.stderr.write("Error: %s; %s\n" % (diag, debug)) > > > + sys.exit(1) > > > + > > > +#Store an ASL command, matching AML offset, and input line (for > debugging) > > > +def add_asl(lineno, line): > > > + l = asl_line() > > > + l.line = line > > > + l.lineno = lineno > > > + l.aml_offset = len(aml) > > > + asl.append(l) > > > + > > > +#Store an AML byte sequence > > > +#Verify that offset output by iasl matches # of bytes so far > > > +def add_aml(offset, line): > > > + o = int(offset, 16); > > > + # Sanity check: offset must match size of code so far > > > + if (o != len(aml)): > > > + die("Offset 0x%x != 0x%x" % (o, len(aml))) > > > + # Strip any trailing dots and ASCII dump after " > > > + line = re.sub(r'\s*\.*\s*".*$',"", line) > > > + # Strip traling whitespace > > > + line = re.sub(r'\s+$',"", line) > > > + # Strip leading whitespace > > > + line = re.sub(r'^\s+',"", line) > > > + # Split on whitespace > > > + code = re.split(r'\s+', line) > > > + for c in code: > > > + # Require a legal hex number, two digits > > > + if (not(re.search(r'^[0-9A-Fa-f][0-9A-Fa-f]$', c))): > > > + die("Unexpected octet %s" % c); > > > + aml.append(int(c, 16)); > > > + > > > +# Process aml bytecode array, decoding AML > > > +def aml_pkglen_bytes(offset): > > > + # PkgLength can be multibyte. Bits 8-7 give the # of extra bytes. > > > + pkglenbytes = aml[offset] >> 6; > > > + return pkglenbytes + 1 > > > + > > > +def aml_pkglen(offset): > > > + pkgstart = offset > > > + pkglenbytes = aml_pkglen_bytes(offset) > > > + pkglen = aml[offset] & 0x3F > > > + # If multibyte, first nibble only uses bits 0-3 > > > + if ((pkglenbytes > 0) and (pkglen & 0x30)): > > > + die("PkgLen bytes 0x%x but first nibble 0x%x expected 0x0X" % > > > + (pkglen, pkglen)) > > > + offset += 1 > > > + pkglenbytes -= 1 > > > + for i in range(pkglenbytes): > > > + pkglen |= aml[offset + i] << (i * 8 + 4) > > > + if (len(aml) < pkgstart + pkglen): > > > + die("PckgLen 0x%x at offset 0x%x exceeds AML size 0x%x" % > > > + (pkglen, offset, len(aml))) > > > + return pkglen > > > + > > > +# Given method offset, find its NameString offset > > > +def aml_method_string(offset): > > > + #0x14 MethodOp PkgLength NameString MethodFlags TermList > > > + if (aml[offset] != 0x14): > > > + die( "Method offset 0x%x: expected 0x14 actual 0x%x" % > > > + (offset, aml[offset])); > > > + offset += 1; > > > + pkglenbytes = aml_pkglen_bytes(offset) > > > + offset += pkglenbytes; > > > + return offset; > > > + > > > +# Given name offset, find its NameString offset > > > +def aml_name_string(offset): > > > + #0x08 NameOp NameString DataRef > > > + if (aml[offset] != 0x08): > > > + die( "Name offset 0x%x: expected 0x08 actual 0x%x" % > > > + (offset, aml[offset])); > > > + offset += 1 > > > + # Block Name Modifier. Skip it. > > > + if (aml[offset] == 0x5c or aml[offset] == 0x5e): > > > + offset += 1 > > > + return offset; > > > + > > > +# Given data offset, find dword const offset > > > +def aml_data_dword_const(offset): > > > + #0x08 NameOp NameString DataRef > > > + if (aml[offset] != 0x0C): > > > + die( "Name offset 0x%x: expected 0x0C actual 0x%x" % > > > + (offset, aml[offset])); > > > + return offset + 1; > > > + > > > +# Given data offset, find word const offset > > > +def aml_data_word_const(offset): > > > + #0x08 NameOp NameString DataRef > > > + if (aml[offset] != 0x0B): > > > + die( "Name offset 0x%x: expected 0x0B actual 0x%x" % > > > + (offset, aml[offset])); > > > + return offset + 1; > > > + > > > +# Given data offset, find byte const offset > > > +def aml_data_byte_const(offset): > > > + #0x08 NameOp NameString DataRef > > > + if (aml[offset] != 0x0A): > > > + die( "Name offset 0x%x: expected 0x0A actual 0x%x" % > > > + (offset, aml[offset])); > > > + return offset + 1; > > > + > > > +# Given name offset, find dword const offset > > > +def aml_name_dword_const(offset): > > > + return aml_data_dword_const(aml_name_string(offset) + 4) > > > + > > > +# Given name offset, find word const offset > > > +def aml_name_word_const(offset): > > > + return aml_data_word_const(aml_name_string(offset) + 4) > > > + > > > +# Given name offset, find byte const offset > > > +def aml_name_byte_const(offset): > > > + return aml_data_byte_const(aml_name_string(offset) + 4) > > > + > > > +def aml_processor_start(offset): > > > + #0x5B 0x83 ProcessorOp PkgLength NameString ProcID > > > + if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x83)): > > > + die( "Name offset 0x%x: expected 0x5B 0x83 actual 0x%x > 0x%x" % > > > + (offset, aml[offset], aml[offset + 1])); > > > + return offset > > > + > > > +def aml_processor_string(offset): > > > + #0x5B 0x83 ProcessorOp PkgLength NameString ProcID > > > + start = aml_processor_start(offset) > > > + offset += 2 > > > + pkglenbytes = aml_pkglen_bytes(offset) > > > + offset += pkglenbytes > > > + return offset > > > + > > > +def aml_processor_end(offset): > > > + start = aml_processor_start(offset) > > > + offset += 2 > > > + pkglenbytes = aml_pkglen_bytes(offset) > > > + pkglen = aml_pkglen(offset) > > > + return offset + pkglen > > > + > > > +def aml_package_start(offset): > > > + offset = aml_name_string(offset) + 4 > > > + # 0x12 PkgLength NumElements PackageElementList > > > + if (aml[offset] != 0x12): > > > + die( "Name offset 0x%x: expected 0x12 actual 0x%x" % > > > + (offset, aml[offset])); > > > + offset += 1 > > > + return offset + aml_pkglen_bytes(offset) + 1 > > > + > > > +lineno = 0 > > > +for line in fileinput.input(): > > > + # Strip trailing newline > > > + line = line.rstrip(); > > > + # line number and debug string to output in case of errors > > > + lineno = lineno + 1 > > > + debug = "input line %d: %s" % (lineno, line) > > > + #ASL listing: space, then line#, then ...., then code > > > + pasl = re.compile('^\s+([0-9]+)\.\.\.\.\s*') > > > + m = pasl.search(line) > > > + if (m): > > > + add_asl(lineno, pasl.sub("", line)); > > > + # AML listing: offset in hex, then ...., then code > > > + paml = re.compile('^([0-9A-Fa-f]+)\.\.\.\.\s*') > > > + m = paml.search(line) > > > + if (m): > > > + add_aml(m.group(1), paml.sub("", line)) > > > + > > > +# Now go over code > > > +# Track AML offset of a previous non-empty ASL command > > > +prev_aml_offset = -1 > > > +for i in range(len(asl)): > > > + debug = "input line %d: %s" % (asl[i].lineno, asl[i].line) > > > + > > > + l = asl[i].line > > > + > > > + # skip if not an extract directive > > > + a = len(re.findall(r'ACPI_EXTRACT', l)) > > > + if (not a): > > > + # If not empty, store AML offset. Will be used for sanity checks > > > + # IASL seems to put {}. at random places in the listing. > > > + # Ignore any non-words for the purpose of this test. > > > + m = re.search(r'\w+', l) > > > + if (m): > > > + prev_aml_offset = asl[i].aml_offset > > > + continue > > > + > > > + if (a > 1): > > > + die("Expected at most one ACPI_EXTRACT per line, actual %d" % > a) > > > + > > > + mext = re.search(r''' > > > + ^\s* # leading whitespace > > > + /\*\s* # start C comment > > > + (ACPI_EXTRACT_\w+) # directive: group(1) > > > + \s+ # whitspace separates directive from array > name > > > + (\w+) # array name: group(2) > > > + \s*\*/ # end of C comment > > > + \s*$ # trailing whitespace > > > + ''', l, re.VERBOSE) > > > + if (not mext): > > > + die("Stray ACPI_EXTRACT in input") > > > + > > > + # previous command must have produced some AML, > > > + # otherwise we are in a middle of a block > > > + if (prev_aml_offset == asl[i].aml_offset): > > > + die("ACPI_EXTRACT directive in the middle of a block") > > > + > > > + directive = mext.group(1) > > > + array = mext.group(2) > > > + offset = asl[i].aml_offset > > > + > > > + if (directive == "ACPI_EXTRACT_ALL_CODE"): > > > + if array in output: > > > + die("%s directive used more than once" % directive) > > > + output[array] = aml > > > + continue > > > + if (directive == "ACPI_EXTRACT_NAME_DWORD_CONST"): > > > + offset = aml_name_dword_const(offset) > > > + elif (directive == "ACPI_EXTRACT_NAME_WORD_CONST"): > > > + offset = aml_name_word_const(offset) > > > + elif (directive == "ACPI_EXTRACT_NAME_BYTE_CONST"): > > > + offset = aml_name_byte_const(offset) > > > + elif (directive == "ACPI_EXTRACT_NAME_STRING"): > > > + offset = aml_name_string(offset) > > > + elif (directive == "ACPI_EXTRACT_METHOD_STRING"): > > > + offset = aml_method_string(offset) > > > + elif (directive == "ACPI_EXTRACT_PROCESSOR_START"): > > > + offset = aml_processor_start(offset) > > > + elif (directive == "ACPI_EXTRACT_PROCESSOR_STRING"): > > > + offset = aml_processor_string(offset) > > > + elif (directive == "ACPI_EXTRACT_PROCESSOR_END"): > > > + offset = aml_processor_end(offset) > > > + elif (directive == "ACPI_EXTRACT_PKG_START"): > > > + offset = aml_package_start(offset) > > > + else: > > > + die("Unsupported directive %s" % directive) > > > + > > > + if array not in output: > > > + output[array] = [] > > > + output[array].append(offset) > > > + > > > +debug = "at end of file" > > > + > > > +def get_value_type(maxvalue): > > > + #Use type large enough to fit the table > > > + if (maxvalue >= 0x10000): > > > + return "int" > > > + elif (maxvalue >= 0x100): > > > + return "short" > > > + else: > > > + return "char" > > > + > > > +# Pretty print output > > > +for array in output.keys(): > > > + otype = get_value_type(max(output[array])) > > > + odata = [] > > > + for value in output[array]: > > > + odata.append("0x%x" % value) > > > + sys.stdout.write("unsigned %s %s[] = {\n" % (otype, array)) > > > + sys.stdout.write(",\n".join(odata)) > > > + sys.stdout.write('\n};\n'); > > > diff --git a/tools/firmware/hvmloader/tools/acpi_extract_preprocess.py > b/tools/firmware/hvmloader/tools/acpi_extract_preprocess.py > > > new file mode 100644 > > > index 0000000..4ae364e > > > --- /dev/null > > > +++ b/tools/firmware/hvmloader/tools/acpi_extract_preprocess.py > > > @@ -0,0 +1,41 @@ > > > +#!/usr/bin/python > > > +# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@xxxxxxxxxx> > > > +# > > > +# This file may be distributed under the terms of the GNU GPLv3 license. > > > + > > > +# Read a preprocessed ASL listing and put each ACPI_EXTRACT > > > +# directive in a comment, to make iasl skip it. > > > +# We also put each directive on a new line, the machinery > > > +# in tools/acpi_extract.py requires this. > > > + > > > +import re; > > > +import sys; > > > +import fileinput; > > > + > > > +def die(diag): > > > + sys.stderr.write("Error: %s\n" % (diag)) > > > + sys.exit(1) > > > + > > > +# Note: () around pattern make split return matched string as part of > > > list > > > +psplit = re.compile(r''' ( > > > + \b # At word boundary > > > + ACPI_EXTRACT_\w+ # directive > > > + \s+ # some whitespace > > > + \w+ # array name > > > + )''', re.VERBOSE); > > > + > > > +lineno = 0 > > > +for line in fileinput.input(): > > > + # line number and debug string to output in case of errors > > > + lineno = lineno + 1 > > > + debug = "input line %d: %s" % (lineno, line.rstrip()) > > > + > > > + s = psplit.split(line); > > > + # The way split works, each odd item is the matching ACPI_EXTRACT > directive. > > > + # Put each in a comment, and on a line by itself. > > > + for i in range(len(s)): > > > + if (i % 2): > > > + sys.stdout.write("\n/* %s */\n" % s[i]) > > > + else: > > > + sys.stdout.write(s[i]) > > > + > > > -- > > > 1.8.3.4 > > > > > > > > > > > > _______________________________________________ > > > Xen-devel mailing list > > > Xen-devel@xxxxxxxxxxxxx > > > http://lists.xen.org/xen-devel _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |