|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Timed out waiting for device dev-hvc0.device.
On 12.12.14 02:20, manish jaggi wrote: > On 11 December 2014 at 16:32, Alexander Graf <agraf@xxxxxxx> wrote: >> >> >> On 12.12.14 01:25, manish jaggi wrote: >>> On 11 December 2014 at 02:23, Julien Grall <julien.grall@xxxxxxxxxx> wrote: >>>> Hello, >>>> >>>> >>>> On 11/12/2014 02:27, manish jaggi wrote: >>>>> >>>>> I am facing this issue when booting Xen Dom0 (OpenSuse Rootfs) >>>>> >>>>> ... >>>>> >>>>> [ OK ] Reached target Host and Network Name Lookups. >>>>> [ OK ] Started OpenSSH Daemon. >>>>> [ TIME ] Timed out waiting for device dev-hvc0.device. >>>>> [DEPEND] Dependency failed for Serial Getty on hvc0. >>>>> [ OK ] Reached target Login Prompts. >>>>> >>>>> >>>>> Any Idea? what could be wrong here >>>> >>>> >>>> Please provide the full boot log. With only those 5 lines we can only guess >>>> what could be the issue. >>>> >>> Added >>>> Maybe the DOM0 kernel didn't detect that it's running on Xen or you forgot >>>> to enable CONFIG_XEN_HVC in your config. >>> That is already enabled. >>> FYI with other rootfs I dont see any problem. >>>> >>>> Regards, >>>> >>>> -- >>>> Julien Grall >>> >>> [... Std linux boot log .. ] >>> kjournald starting. Commit interval 5 seconds >>> EXT3-fs (sda2): using internal journal >>> EXT3-fs (sda2): mounted filesystem with writeback data mode >>> VFS: Mounted root (ext3 filesystem) on device 8:2. >>> devtmpfs: mounted >>> Freeing unused kernel memory: 236K (ffffffc000789000 - ffffffc0007c4000) >>> random: systemd urandom read with 4 bits of entropy available >>> systemd[1]: systemd 210 running in system mode. (+PAM -LIBWRAP +AUDIT >>> +SELINUX -IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP >>> +APPARMOR) >>> systemd[1]: Detected virtualization 'xen'. >>> systemd[1]: Detected architecture 'arm64'. >>> >>> Welcome to openSUSE 13.2 (Harlequin) (aarch64)! >>> >>> systemd[1]: Failed to insert module 'autofs4' >>> systemd[1]: Failed to insert module 'ipv6' >>> systemd[1]: Set hostname to <linux>. >>> systemd[1]: Cannot add dependency job for unit >>> display-manager.service, ignoring: Unit display-manager.service failed >>> to load: No such file or directory. >>> systemd[1]: Expecting device dev-hvc0.device... >>> Expecting device dev-hvc0.device... >>> systemd[1]: Starting Remote File Systems (Pre). >>> [ OK ] Reached target Remote File Systems (Pre). >>> systemd[1]: Reached target Remote File Systems (Pre). >>> systemd[1]: Starting Remote File Systems. >>> [ OK ] Reached target Remote File Systems. >>> systemd[1]: Reached target Remote File Systems. >>> systemd[1]: Set up automount Arbitrary Executable File Formats File >>> System Automount Point. >>> systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. >>> systemd[1]: Started Dispatch Password Requests to Console Directory Watch. >>> systemd[1]: Starting Paths. >>> [ OK ] Reached target Paths. >>> systemd[1]: Reached target Paths. >>> systemd[1]: Starting Swap. >>> [ OK ] Reached target Swap. >>> systemd[1]: Reached target Swap. >>> systemd[1]: Starting Root Slice. >>> [ OK ] Created slice Root Slice. >>> systemd[1]: Created slice Root Slice. >>> systemd[1]: Starting udev Kernel Socket. >>> [ OK ] Listening on udev Kernel Socket. >>> systemd[1]: Listening on udev Kernel Socket. >>> systemd[1]: Starting Journal Socket. >>> [ OK ] Listening on Journal Socket. >>> systemd[1]: Listening on Journal Socket. >>> systemd[1]: Starting LVM2 metadata daemon socket. >>> [ OK ] Listening on LVM2 metadata daemon socket. >>> systemd[1]: Listening on LVM2 metadata daemon socket. >>> systemd[1]: Starting /dev/initctl Compatibility Named Pipe. >>> [ OK ] Listening on /dev/initctl Compatibility Named Pipe. >>> systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. >>> systemd[1]: Starting Delayed Shutdown Socket. >>> [ OK ] Listening on Delayed Shutdown Socket. >>> systemd[1]: Listening on Delayed Shutdown Socket. >>> systemd[1]: Starting Syslog Socket. >>> [ OK ] Listening on Syslog Socket. >>> systemd[1]: Listening on Syslog Socket. >>> systemd[1]: Starting User and Session Slice. >>> [ OK ] Created slice User and Session Slice. >>> systemd[1]: Created slice User and Session Slice. >>> systemd[1]: Starting System Slice. >>> [ OK ] Created slice System Slice. >>> systemd[1]: Created slice System Slice. >>> systemd[1]: Started Create list of required static device nodes for >>> the current kernel. >>> systemd[1]: Starting Create static device nodes in /dev... >>> Starting Create static device nodes in /dev... >>> systemd[1]: Mounting POSIX Message Queue File System... >>> Mounting POSIX Message Queue File System... >>> systemd[1]: Mounting Debug File System... >>> Mounting Debug File System... >>> systemd[1]: Mounting Huge Pages File System... >>> Mounting Huge Pages File System... >>> systemd[1]: Starting Journal Service... >>> Starting Journal Service... >>> [ OK ] Started Journal Service. >>> systemd[1]: Started Journal Service. >>> [ OK ] Created slice system-serial\x2dgetty.slice. >>> [ OK ] Created slice system-getty.slice. >>> Starting LVM2 metadata daemon... >>> Starting Load Kernel Modules... >>> Starting Setup Virtual Console... >>> Starting Remount Root and Kernel File Systems... >>> Starting Create dynamic rule for /dev/root link... >>> [ OK ] Reached target Slices. >>> [ OK ] Listening on udev Control Socket. >>> [ OK ] Mounted Huge Pages File System. >>> [ OK ] Mounted Debug File System. >>> [ OK ] Mounted POSIX Message Queue File System. >>> [ OK ] Started Create static device nodes in /dev. >>> [ OK ] Started LVM2 metadata daemon. >>> [FAILED] Failed to start Load Kernel Modules. >>> See "systemctl status systemd-modules-load.service" for details. >>> [ OK ] Started Setup Virtual Console. >>> [ OK ] Started Remount Root and Kernel File Systems. >>> [ OK ] Started Create dynamic rule for /dev/root link. >>> Starting Load/Save Random Seed... >>> Starting udev Coldplug all Devices... >>> Starting Apply Kernel Variables... >>> Mounting FUSE Control File System... >>> Starting udev Kernel Device Manager... >>> [ OK ] Reached target Local File Systems (Pre). >>> Mounting Runtime Directory... >>> [ OK ] Mounted FUSE Control File System. >>> [ OK ] Mounted Runtime Directory. >>> [ OK ] Started udev Kernel Device Manager. >>> [ OK ] Started Load/Save Random Seed. >>> [ OK ] Started Apply Kernel Variables. >>> [ OK ] Started udev Coldplug all Devices. >>> thunder-nicvf 0002:01:00.3 enP2p1s0f3: renamed from eth2 >>> Starting udev Wait for Complete Device Initialization... >>> thunder-nicvf 0002:01:00.1 enP2p1s0f1: renamed from eth0 >>> thunder-nicvf 0002:01:00.2 enP2p1s0f2: renamed from eth1 >>> thunder-nicvf 0002:01:00.4 enP2p1s0f4: renamed from eth3 >>> [ OK ] Started udev Wait for Complete Device Initialization. >>> Starting Activation of LVM2 logical volumes... >>> [ OK ] Started Activation of LVM2 logical volumes. >>> [ OK ] Reached target Encrypted Volumes. >>> Starting Activation of LVM2 logical volumes... >>> [ OK ] Started Activation of LVM2 logical volumes. >>> [ OK ] Reached target Local File Systems. >>> Starting Trigger Flushing of Journal to Persistent Storage... >>> Starting Create Volatile Files and Directories... >>> systemd-journald[884]: Received request to flush runtime journal from PID 1 >>> [ OK ] Started Trigger Flushing of Journal to Persistent Storage. >>> [ OK ] Started Create Volatile Files and Directories. >>> Starting Update UTMP about System Reboot/Shutdown... >>> [ OK ] Started Update UTMP about System Reboot/Shutdown. >>> [ OK ] Reached target System Initialization. >>> [ OK ] Listening on D-Bus System Message Bus Socket. >>> [ OK ] Reached target Sockets. >>> [ OK ] Reached target Timers. >>> Starting Restore Sound Card State... >>> [ OK ] Reached target Basic System. >>> Starting Permit User Sessions... >>> Starting /etc/init.d/boot.local Compatibility... >>> Starting System Logging Service... >>> Starting Purge old kernels... >>> Starting Login Service... >>> Starting D-Bus System Message Bus... >>> [ OK ] Started D-Bus System Message Bus. >>> Starting wicked DHCPv4 supplicant service... >>> Starting wicked AutoIPv4 supplicant service... >>> Starting wicked DHCPv6 supplicant service... >>> [ OK ] Started Restore Sound Card State. >>> [ OK ] Started Permit User Sessions. >>> [ OK ] Started /etc/init.d/boot.local Compatibility. >>> [ OK ] Started wicked AutoIPv4 supplicant service. >>> [ OK ] Started wicked DHCPv6 supplicant service. >>> [ OK ] Started wicked DHCPv4 supplicant service. >>> [ OK ] Started Login Service. >>> Starting wicked network management service daemon... >>> Starting Getty on tty1... >>> [ OK ] Started Getty on tty1. >>> [ OK ] Started System Logging Service. >>> [ OK ] Started wicked network management service daemon. >>> Starting wicked network nanny service... >>> [ OK ] Started wicked network nanny service. >>> Starting wicked managed network interfaces... >>> [ OK ] Started Purge old kernels. >>> [ OK ] Started wicked managed network interfaces. >>> [ OK ] Reached target Network. >>> Starting OpenSSH Daemon... >>> Starting NTP Server Daemon... >>> [ OK ] Started NTP Server Daemon. >>> [ OK ] Started OpenSSH Daemon. >>> [ TIME ] Timed out waiting for device dev-hvc0.device. >>> [DEPEND] Dependency failed for Serial Getty on hvc0. >>> [ OK ] Reached target Login Prompts. >>> Starting /etc/init.d/after.local Compatibility... >>> [ OK ] Started /etc/init.d/after.local Compatibility. >>> [ OK ] Reached target Multi-User System. >>> [ OK ] Reached target Graphical Interface. >>> >>> >>> Alex,any idea how to look for what is causing timeout ? >>> Grep -rn hcv0 in suse file system resulted nil. >>> I am using >>> https://wiki.linaro.org/LEG/Engineering/Xen_booting_on_Foundationv8 >> >> Hrm, does your kernel have devtmpfs support enabled? Apparently SSH did >> come up, can you try to log in via ssh and see whether you can see an >> hvc0 device node in /dev? >> >> >> Alex > I cant, as I have to do dhcpcd post login. I dont see dev-hvc0 in > other rootfs. Is it required for xen or can be it be disabled ? It gets generated automatically based on the console=hvc0 command line option you're passing into your kernel. Something also believes that you do have a working graphical console (tty1). Alex _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |