Xen project Mailing List

[PATCH v7 0/5] introduce generic implementation of macros from bug.h

A large part of the content of the bug.h is repeated among all architectures (especially x86 and RISCV have the same implementation), so it was created a new config CONFIG_GENERIC_BUG_FRAME which is used to introduce generic implementation of do_bug_frame() and move x86's <asm/bug.h> to <xen/common/...> with the following changes: * Add inclusion of arch-specific header <asm/bug.h> * Rename the guard and remove x86 specific changes * Wrap macros BUG_FRAME/run_in_exception_handler/WARN/BUG/assert_failed/etc into #ifndef "BUG_FRAME/run_in_exception_handler/WARN/BUG/assert_failed/etc" thereby each architecture can override the generic implementation of macros. * Add #if{n}def __ASSEMBLY__ ... #endif * Introduce BUG_FRAME_STRUCTURE define to be able to change the structure of bug frame * Introduce BUG_INSTR and BUG_ASM_CONST to make _ASM_BUGFRAME_TEXT reusable between architectures * Introduce BUG_DEBUGGER_TRAP_FATAL to hide details about TRAP_invalid_op for specific architecture * Introduce BUILD_BUG_ON_LINE_WIDTH(line) to make more generic BUG_FRAME macros * Make macros related to bug frame structure more generic. RISC-V will be switched to use <xen/bug.h> and in the future, it will use common the version of do_bug_frame() when xen/common will work for RISC-V. --- Changes in V7: * Introduce new patch to clean up ARM's <asm/bug.h> from unused defines: BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH, BUG_LINE_HI_WIDTH * fix addressed code style. * Remove '#include <xen/debugger.h>' from bug.c. it should be a part of <asm/bug.h>. * move BUILD_BUG_ON_LINE_WIDTH to '#ifndef BUG_FRAME_STRUCT' and define dummy BUILD_BUG_ON_LINE_WIDTH when BUG_FRAME_STRUCT is defined. * remove update prototype of 'void (*fn)(const struct cpu_user_regs *)' to 'void (*fn)(struct cpu_user_regs *)'. * add code to to make sure the type used in run_in_exception_handler() matches the one used here. * Remove #undef {BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH, BUG_LINE_HI_WIDTH} from ARM and x86: - for ARM was created separate patch where the defines are removed as unused. - for x86, the defines were removed now not to produce #undef of them to remove them again in the following-up patch * make eip 'const void *' in x86's do_invalid_op() * change [eip = (unsigned char *)eip + sizeof(bug_insn);] to [eip += sizeof(bug_insn);] * add '#include <xen/debugger.h>' to x86's <asm/bug.h> --- Changes in V6: * Update the cover letter message: add information that BUG_DEBUGGER_TRAP_FATAL() and BUILD_BUG_ON_LINE_WIDTH(). * Introduce BUILD_BUG_ON_LINE_WIDTH(line) to make more generic BUG_FRAME macros. * fix addressed code style * change -EINVAL to -ENOENT in case when bug_frame wasn't found in generic do_bug_frame(). * change all 'return id' to 'break' inside switch/case of do_bug_frame(). * move up "#ifndef __ASSEMBLY__" to include BUG_DEBUGGER_TRAP_FATAL. * update the comment of BUG_ASM_CONST. * Introduce BUILD_BUG_ON_LINE_WIDTH(line) to make more generic BUG_FRAME macros * remove #ifndef BUG_FRAME_STRUCT around BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH as it is required to be defined before <asm/bug.h> as it is used by x86's <asm/bug.h> when the header is included in assembly code. * add undef of BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH for ARM & x86 as they were introduced unconditionally in <xen/bug.h>. * update the type of eip to 'void *' in do_invalid_op() for x86 * fix the logic of do_invalid_op() for x86 * move macros BUG_DEBUGGER_TRAP_FATAL under #ifndef __ASSEMBLY__ as it is not necessary to be in assembly code for x86. --- Changes in V5: * Update the cover letter message as the patch, on which the patch series is based, has been merged to staging. * Remove "#ifdef BUG_FN_REG..." from generic do_bug_frame() as ARM will use generic implementation fully. --- Changes in V4: * Introduce and use generic BUG_DEBUGGER_TRAP_FATAL(regs) mnacros which is used to deal with debugger_trap_fatal(TRAP_invalid_op, regs) where TRAP_invalid_op is x86-specific. * Add comment what do_bug_frame() returns. * Do refactoring of do_bug_frame(): * invert the condition 'if ( region )' in do_bug_frame() to reduce the indention. * change type of variable i from 'unsigned int' to 'size_t' as it is compared with n_bugs which has type 'size_t' * Remove '#include <xen/stringify.h>' from <xen/bug.h> as it doesn't need any more after switch to x86 implementation. * Remove '#include <xen/errno.h>' as it isn't needed any more * Move bug_*() macros inside '#ifndef BUG_FRAME_STRUCT' * Add <xen/lib.h> to fix compile issue with BUILD_ON()... * Add documentation for BUG_ASM_CONST. * Defines BUG_DISP_WIDTH, BUG_LINE_LO_WIDTH, BUG_LINE_HI_WIDTH were moved into "ifndef BUG_FRAME_STRUCT" in <xen/bug.h> as they are specific for 'struct bug_frame' and so should co-exist together. So the defines were back to <asm/bug.h> until BUG_FRAME_STRUCT will be defined in <asm/bug.h>. * Switch ARM implementation to generic one * Remove BUG_FN_REG from arm{16,32}/bug.h as it isn't needed after switch to generic implementation * Back comment /* !__ASSEMBLY__ */ for #else case in <asm/bug.h> * Remove changes related to x86/.../asm/debuger.h as do_bug_frame() prototype was updated and cpu_user_regs isn't const any more. --- Changes in V3: * Nothing was done with the comment in <xen/bug.h> before run_in_exception_handler but I think it can be changed during the merge. * Add debugger_trap_fatal() to do_bug_frame(). It simplifies usage of do_bug_frame() for x86 so making handle_bug_frame() and find_bug_frame() not needed anymore. * Update do_bug_frame() to return -EINVAL if something goes wrong; otherwise id of bug_frame * Update _ASM_BUGFRAME_TEXT to make it more portable. * Drop unnecessary comments. * Update patch 2 not to break compilation: move some parts from patches 3 and 4 to patch 2 * As prototype and what do_bug_frame() returns was changed so patch 3 and 4 was updated to use a new version of do_bug_frame * Change debugger_trap_fatal() prototype for x86 to align with prototype in <xen/debugger.h> --- Changes in V2: * Update cover letter. * Switch to x86 implementation as generic as it is more compact ( at least from the point of view of bug frame structure). * Put [PATCH v1 4/4] xen: change <asm/bug.h> to <xen/bug.h> as second patch, update the patch to change all <asm/bug.h> to <xen/bug.h> among the whole project to not break compilation. * Rename CONFIG_GENERIC_DO_BUG_FRAME to CONFIG_GENERIC_BUG_FRAME. * Change the macro bug_loc(b) to avoid the need for a cast: #define bug_loc(b) ((unsigned long)(b) + (b)->loc_disp) * Rename BUG_FRAME_STUFF to BUG_FRAME_STRUCT * Make macros related to bug frame structure more generic. * Rename bug_file() in ARM implementation to bug_ptr() as generic do_bug_frame() uses bug_ptr(). * Introduce BUG_INSTR and MODIFIER to make _ASM_BUGFRAME_TEXT reusable between x86 and RISC-V. * Rework do_invalid_op() in x86 ( re-use handle_bug_frame() and find_bug_frame() ) --- Oleksii Kurochko (5): xen: introduce CONFIG_GENERIC_BUG_FRAME xen/arm: remove unused defines in <asm/bug.h> xen: change <asm/bug.h> to <xen/bug.h> xen/arm: switch ARM to use generic implementation of bug.h xen/x86: switch x86 to use generic implemetation of bug.h xen/arch/arm/Kconfig | 1 + xen/arch/arm/arm32/traps.c | 2 +- xen/arch/arm/include/asm/arm32/bug.h | 2 - xen/arch/arm/include/asm/arm64/bug.h | 2 - xen/arch/arm/include/asm/bug.h | 88 +-------------- xen/arch/arm/include/asm/div64.h | 2 +- xen/arch/arm/include/asm/traps.h | 2 - xen/arch/arm/traps.c | 81 +------------- xen/arch/arm/vgic/vgic-v2.c | 2 +- xen/arch/arm/vgic/vgic.c | 2 +- xen/arch/x86/Kconfig | 1 + xen/arch/x86/acpi/cpufreq/cpufreq.c | 2 +- xen/arch/x86/include/asm/asm_defns.h | 2 +- xen/arch/x86/include/asm/bug.h | 84 +------------- xen/arch/x86/traps.c | 81 ++------------ xen/common/Kconfig | 3 + xen/common/Makefile | 1 + xen/common/bug.c | 107 ++++++++++++++++++ xen/drivers/cpufreq/cpufreq.c | 2 +- xen/include/xen/bug.h | 162 +++++++++++++++++++++++++++ xen/include/xen/lib.h | 2 +- 21 files changed, 299 insertions(+), 332 deletions(-) create mode 100644 xen/common/bug.c create mode 100644 xen/include/xen/bug.h -- 2.39.2

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.