[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Xen network question


  • To: Xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Damjan Rems <d_rems@xxxxxxxxx>
  • Date: Wed, 10 Aug 2005 04:46:24 -0700 (PDT)
  • Delivery-date: Wed, 10 Aug 2005 11:44:46 +0000
  • Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com; h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding; b=VUgyHkjJ98kk1wmcjMPYmx3+cydAdcg0GlNvsndrCEKiozSzj1Qt0v6561mDhWWfsLdYFFigIBOumr7cJOa86WzCZKsO7SpqMVzLIPbHLKiAbBlx706IRnLn0LRQ/hqF6d6WlgikF8ik6PiQv1DtXMmxcDcmDlhS+ux/LT/8AtE= ;
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I am no expert to Linux or Xen. Runing Xen on Suse
9.3.

Network scenario:
Dom0 eth0 ip=192.168.1.118 mask=255.255.255.0,
gw=192.168.1.1.
I would like to setup domU eth0 ip=192.168.1.116. domU
should also have access to Internet. I was able to
follow instructions by Gregorz in previous posts but
the best I could get was:

1. I could ping domU from dom0, but not dom0 from
domU. If I disable firewall I can ping from both
sites. But this should not be OK.

2. I can not get to Internet even from dom0. Look like
gateway address (route) is lost.


For dom0 I was using:
brctl addbr xen-br0
ip addr 192.168.1.118 brd 192.168.1.255 scope global
dev xen-br0
route del -net 192.168.1.0/24 eth0
route add -net 192.168.1.0/24 xen-br0
brctl addif xen-br0 eth0

For domU I was using:
ifconfig eth0 192.168.1.116

What am I doing wrong?

by

TheR


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.