Re: [Xen-users] How to set up real network cards?

[Jason <fearthepenguin@xxxxxxxxxxxxxxxxx>]

Jason Clark wrote:
> are you using PCI passthru? If you are passing each device directly to 
> the DomU, then it will just be standard linux networking.  Being 
> onboard though, I suspect you are dealing with some sort of realtek 
> switch fabric that shows up as a single PCI device (roboswitch type) 
> and you would not be able to pass that thru.  Can you do an lspci and 
> show us how those devices present themselves?
> Frank Luedke wrote:
> >   I have a hardware here with 9 NICs (8 of them on-board)
> >  and I want to set up 8 NICs as real network interfaces,
> >  one for each xen domain. The 9th NIC should be Domain-0
> >  which is working well. Currently I have only set up
> >  one domain which is running in bridged mode at the moment.
> >
> >   I am currently trying to set up a second domain which
> >  uses eth2 but I didn't succeed. I want to get the
> >  system run with 8 domains in which every guest is
> >  using one NIC.
> >
> >   Is there some documentation or FAQ about how to set up
> >  this configuration?
> >
> > Cheers,
> >  Frank
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
> >
> >   

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users