Re: [Xen-users] Xen 3.1 on Debian Etch: Dom0 eth0 dead

[Florian Engelmann <mailinglist@xxxxxxxx>]

Christian Horn schrieb:
> On Mon, Sep 10, 2007 at 09:49:10AM +0200, Florian Engelmann (Manntech) wrote:
>   
> > ping my Server what also failed. An ifconfig gives me an eth0 device with my
> > local IP 192.168.1.6 a lo device a peth0 device a vif0.0 device and a xenbr0
> > device without any IP. I did not modify the /etc/xen/xend-config.sxp and my
> > /etc/network/interfaces looks like this:
> >
> > iface eth0 inet static
> > iface eth3 inet static
> >
> >
> > While eth0 is my default LAN interface and eth3 is my crossover interface to
> > the 2nd clusternode. If I change
> >
> > (network-script network-bridge)
> > to
> > (network-script 'network-bridge netdev=eth1')
> >     
> eth3 is configured with an other ip, and eth1 is the one to be enslaved into
> the bridge with the domUs?
> Would be an internal-only bridge this way without doing routing.
> If this is wanted you should assign an ip to eth1 for debugging, to see if
> it can reach the domUs.
>
> Christian
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>   
After some tests it looks like bridgeing with the dell powerdege 2900 
onboard broadcom nic does not work. I changed to eth2 (intel pro 1000) 
and everything works fine. kernel bug?
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users