[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] install error: No module ehci-hcd found for kernel 2.6.18.8-xen0 (I added the module "EHCI HCD" in buildin Xen0-Kernel)


  • To: "You, Yongkang" <yongkang.you@xxxxxxxxx>
  • From: "Yuming fang" <fangyuming.leo@xxxxxxxxx>
  • Date: Wed, 10 Sep 2008 22:49:31 +0800
  • Cc: xen-users <xen-users@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Wed, 10 Sep 2008 07:50:10 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version :content-type:references; b=KBNmsFVqiN5PYLeM3S89sOt+BnsQ893AEJJ5Qd1t1jJwDA75JDMAbSMX74DeXvrUvL 5VFGZ07nJwRdnMSTTQ2RaiSR2OrkIW0plpvCnMaszaHrI1UuOx3uhUWzLS+xu4E4fWDz xOP4pjDlIkDIW6qzx01Ax4N6aHc8vj2+Xw1h0=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

 
Thank you for your reply.
 
After mkinitrd command? what does this mean? Could you give a example of this command?
 
I added "ehci-hcd" module when I used the command "make linux-2.6-xen0-config CONFIGMODE=menuconfig KERNELS="linux-2.6-xen0" to configure it. However, it still had the same error.
 
Leo

2008/9/10 You, Yongkang <yongkang.you@xxxxxxxxx>
Try to add "--buildin ehci-hcd" after your mkinitrd command.
 
Best Regards,
Yongkang You
 


From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Yuming fang
Sent: Wednesday, September 10, 2008 10:34 PM
To: xen-users
Subject: [Xen-users] install error: No module ehci-hcd found for kernel 2.6.18.8-xen0 (I added the module "EHCI HCD" in buildin Xen0-Kernel)

Hi, everyone,

When I installed the Xen3.3, I encountered a error:
No module ehci-hcd found for kernel 2.6.18.8-xen0, aborting.

This error came up when I used the command "mkinitrd -v -f --with=aacraid --with=sd_mod --with=scsi_mod /boot/initrd-2.6.16-xen0.img 2.6.16.29-xen0".

At first, I thought it might be the problem that I did not include the "ehci-hcd" module in buildin Kernel. However, when I used the command "make linux-2.6-xen0-config CONFIGMODE=menuconfig KERNELS="linux-2.6-xen0" and included this module(Device driver->USB support->EHCI HCD USB 2.0 support)  in Kernel, the error information was still "
No module ehci-hcd found for kernel 2.6.18.8-xen0, aborting."

It seems that the error is not related with the module in buildin Kernel(this could configure in menuconfig). So could anyone tell me the cause of this error?

Thanks.
Leo


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.