Re: [Xen-users] Problem to boot Xen 3.3.0 using CentOS as dom0

["Marco Sinhoreli" <msinhore@xxxxxxxxx>]

PS: My LVM root disk is on ide controller.

# lsmod
Module                  Size  Used by
autofs4                24517  2
hidp                   23105  2
rfcomm                 42457  0
l2cap                  29505  10 hidp,rfcomm
bluetooth              53797  5 hidp,rfcomm,l2cap
sunrpc                144893  1
ip_conntrack_netbios_ns     6977  0
ipt_REJECT              9537  0
xt_state                6209  0
ip_conntrack           53025  2 ip_conntrack_netbios_ns,xt_state
nfnetlink              10713  1 ip_conntrack
iptable_filter          7105  0
ip_tables              17029  1 iptable_filter
ip6t_REJECT             9409  1
xt_tcpudp               7105  6
ip6table_filter         6849  1
ip6_tables             18053  1 ip6table_filter
x_tables               17349  6
ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables
ipv6                  258273  13 ip6t_REJECT
xfrm_nalgo             13765  1 ipv6
crypto_api             11969  1 xfrm_nalgo
cpufreq_ondemand       12493  1
dm_mirror              29253  0
dm_multipath           22089  0
dm_mod                 61661  2 dm_mirror,dm_multipath
video                  21193  0
sbs                    18533  0
backlight              10049  1 video
i2c_ec                  9025  1 sbs
i2c_core               23745  1 i2c_ec
button                 10705  0
battery                13637  0
asus_acpi              19289  0
ac                      9157  0
lp                     15849  0
floppy                 57125  0
snd_hda_intel          24793  0
snd_hda_codec         210881  1 snd_hda_intel
snd_seq_dummy           7877  0
sg                     36189  0
snd_seq_oss            32577  0
snd_seq_midi_event     11073  1 snd_seq_oss
snd_seq                49585  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device         11725  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            42945  0
snd_mixer_oss          19009  1 snd_pcm_oss
snd_pcm                72005  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer              24517  2 snd_seq,snd_pcm
snd                    52421  9
snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
k8_edac                18177  0
soundcore              11553  1 snd
k8temp                  9537  0
forcedeth              47433  0
edac_mc                26257  1 k8_edac
snd_page_alloc         14281  2 snd_hda_intel,snd_pcm
hwmon                   7365  1 k8temp
serio_raw              10693  0
pcspkr                  7105  0
parport_pc             29157  1
parport                37513  2 lp,parport_pc
ide_cd                 40033  0
cdrom                  36705  1 ide_cd
sata_nv                28617  3
libata                143997  1 sata_nv
sd_mod                 24897  4
scsi_mod              134605  3 sg,libata,sd_mod
ext3                  123593  2
jbd                    56553  1 ext3
uhci_hcd               25421  0
ohci_hcd               23261  0
ehci_hcd               33357  0


On Tue, Sep 23, 2008 at 4:12 PM, Joseph L. Casale
<JCasale@xxxxxxxxxxxxxxxxx> wrote:
>># mkinitrd -v -f /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen
>
> Well, your not loading any scsi/sata modules for instance?
>
>># lspci
>>
>>00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
>>
>>00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)
>
> Yeah, you need this module I assume for your SATA discs?
> Do an lsmod in your working kernel, figure out what it is, then rebuild your 
> initrd:
>
> # mkinitrd -f --with=<sata module> /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen
>
> That'll get you going...
> jlc
>



-- 
Marco Sinhoreli

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users