[Top] [All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Problem to boot Xen 3.3.0 using CentOS as dom0

  • To: xen-users <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Joseph L. Casale" <JCasale@xxxxxxxxxxxxxxxxx>
  • Date: Tue, 23 Sep 2008 13:12:24 -0600
  • Accept-language: en-US
  • Acceptlanguage: en-US
  • Cc: 'Marco Sinhoreli' <msinhore@xxxxxxxxx>
  • Delivery-date: Tue, 23 Sep 2008 12:14:22 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AckdrwZh4wg3ivAOROeON1aiuMsEnwAAFYEQ
  • Thread-topic: [Xen-users] Problem to boot Xen 3.3.0 using CentOS as dom0
># mkinitrd -v -f /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen

Well, your not loading any scsi/sata modules for instance?

># lspci
>
>00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2)
>
>00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2)

Yeah, you need this module I assume for your SATA discs?
Do an lsmod in your working kernel, figure out what it is, then rebuild your 
initrd:

# mkinitrd -f --with=<sata module> /boot/initrd-2.6.18.8-xen.img 2.6.18.8-xen

That'll get you going...
jlc

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.

Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.