[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] terrible problems with Xen on SLES 10.2 / 11


  • To: Marcin Krol <mrkafk@xxxxxxxxx>
  • From: Ciro Iriarte <cyruspy@xxxxxxxxx>
  • Date: Mon, 1 Jun 2009 17:19:13 -0400
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Mon, 01 Jun 2009 14:20:05 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=dQqKGKJ16Np4lY7WD7hRSp3vo9Q0Z4uz5Gd4oTEy5HpwnfMGhUFbjanbq18QINvbkA Bx8uds3z8Crvz9lcmXQp/TgeBhGFMKr4YeOE+aC77h6d3zxpub9NZctOXM7JOq4TBqSc 9APfaH7CODTngoGlVph87e38+wFtti61wE14o=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

2009/6/1 Marcin Krol <mrkafk@xxxxxxxxx>:
> Fajar A. Nugraha wrote:
>>
>> Here's a question. Does the scsi controller work correctly on normal
>> kernel? I'm beginning to think you have a hardware problem (bad disk
>> or controller, etc.)
>
> It works correctly as far as I can tell, esp. that I have tried in on
> several machines (5 machines in fact, from desktop Netvista to rack-mounted
> eServer 326). It's near impossible that they all have broken hd controllers.
>
>> Does lsmod have aacraid listed? What does lspci say about RAID
>> controller? Mine has this
>> 04:00.0 RAID bus controller: Adaptec AAC-RAID (Rocket) (rev 02)
>
>
> As far as I can tell, there's no problem with that, that's drive controller
> on one of the SLES 11 x86 machines:
>
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE
> Controller (rev 02)
>
>> I have several IBM x series with Xeons, and they all work correctly
>> with xen from RHEL5.x.
>
> How did you install them then? I mean, installation procedure? Did you
> install RPMs by hand? What are the versions?
>
> I can try installing RH with xen to try to pinpoint the problem, I only need
> to know how.
>
> Regards,
> mk
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>

I'm using SLES10 SP2 in production on HP Proliant and SUN Sunfire
servers without issues. Are you using stock modules for the RAID
card?. If you need to install third party modules, you must compile
them booting with the Xen kernel.

Is a good idea to update firmware/bios on the servers and SLES patches
are a must.

Regards,

-- 
Ciro Iriarte
http://cyruspy.wordpress.com
--

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.