[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Re: 3.0.0-rc2: Xen: powernow-k8: Kernel panic - not syncing: Attempted to kill init!



On Tue, Jun 14, 2011 at 03:46:34PM +0200, Tobias Diedrich wrote:
> Konrad Rzeszutek Wilk wrote:
> > On Tue, Jun 14, 2011 at 02:13:33AM +0200, Tobias Diedrich wrote:
> > > Tobias Diedrich wrote:
> > > > Konrad Rzeszutek Wilk wrote:
> > > > > > [    5.523199] rtc_cmos 00:05: setting system clock to 2011-06-13 
> > > > > > 20:20:00 UTC (1307996400)
> > > > > > [    5.523400] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 
> > > > > > 3700+ (1 cpu cores) (version 2.20.00)
> > > > > > [    5.530956] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
> > > > > > [    5.531072] powernow-k8: fid 0xa (1800 MHz), vid 0xa
> > > > > > [    5.531187] powernow-k8: fid 0xc (2000 MHz), vid 0x8
> > > > > > [    5.531301] powernow-k8: fid 0xe (2200 MHz), vid 0x8
> > > > > > [    5.531460] Marking TSC unstable due to cpufreq changes
> > > > > > [    5.531680] powernow-k8: fid trans failed, fid 0x2, curr 0x0
> > > > > > [    5.531802] BUG: unable to handle kernel paging request at 
> > > > > > ffff880807e07b78
> > > > > > [    5.531982] IP: [<ffffffff81479163>] 
> > > > > > cpufreq_stats_update+0x46/0x5b
> > > > > 
> > > > > For this one, you will have to fire out gdb and disassemble the code 
> > > > > to
> > > > > figure out where it failed. Look for 'gdb vmlinux' and 'disassembly' 
> > > > > on this
> > > > > mailing list - that should provide some hints.
> > > > 
> > > > Probably because of the 'fid trans failed' stat->last_index is -1
> > > 
> > > It's set to -1 in cpufreq_stats_create_table(), the second call to
> > > freq_table_get_index() doesn't check against -1 (expecting the call
> > > to always succeed):
> > > 
> > >   stat->last_time = get_jiffies_64();
> > >   stat->last_index = freq_table_get_index(stat, policy->cur);
> > 
> > What is policy->cur? Is is 800000 ? If so, does this fix your problem:
> 
> Yes, it is 800000, but while the patch is probably the right thing
> to do it doesn't help for cpufreq_stats_create_table:
> [    5.740826] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
> [    5.740941] powernow-k8: fid 0xa (1800 MHz), vid 0xa
> [    5.741057] powernow-k8: fid 0xc (2000 MHz), vid 0x8
> [    5.741170] powernow-k8: fid 0xe (2200 MHz), vid 0x8
> [    5.741304] cpufreq_stats_create_table: policy->cur is 800000
> [    5.741475] last_index set to -1 in cpufreq_stats_create_table!
> 
> I think policy->cur used here probably set in powernowk8_cpu_init.

Yup, and there is not much that can be done there. Lets try this patch

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c 
b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 2368e38..7e4a664 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1079,8 +1079,10 @@ static int transition_frequency_fidvid(struct 
powernow_k8_data *data,
        }
 
        res = transition_fid_vid(data, fid, vid);
-       freqs.new = find_khz_freq_from_fid(data->currfid);
+       if (res)
+               return res;
 
+       freqs.new = find_khz_freq_from_fid(data->currfid);
        for_each_cpu(i, data->available_cores) {
                freqs.cpu = i;
                cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
@@ -1112,6 +1114,9 @@ static int transition_frequency_pstate(struct 
powernow_k8_data *data,
        }
 
        res = transition_pstate(data, pstate);
+       if (res)
+               return res;
+
        freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
        for_each_cpu(i, data->available_cores) {
diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
index 4f1b8de..0ecb1e2 100644
--- a/drivers/cpufreq/cpufreq_stats.c
+++ b/drivers/cpufreq/cpufreq_stats.c
@@ -298,11 +298,13 @@ static int cpufreq_stat_notifier_trans(struct 
notifier_block *nb,
        old_index = stat->last_index;
        new_index = freq_table_get_index(stat, freq->new);
 
-       cpufreq_stats_update(freq->cpu);
-       if (old_index == new_index)
+       /* We can't do stat->time_in_state[-1]= .. */
+       if (old_index == -1 || new_index == -1)
                return 0;
 
-       if (old_index == -1 || new_index == -1)
+       cpufreq_stats_update(freq->cpu);
+
+       if (old_index == new_index)
                return 0;
 
        spin_lock(&cpufreq_stats_lock);

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.