[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] [XCP] XCP network and VLAN by Open vSwitch

On Mon, Jul 4, 2011 at 7:05 AM, Wei-Chih Chen <wcchen.tw@xxxxxxxxx> wrote:
> Hello Everyone,
> Sorry that I still have many questions about network of XCP 1.0 .
> Can Linux Bridge and Open vSwitch coexist and work at the same time?

No, the modules conflict.

> The command "xe-switch-network-backend openvswitch" enables vSwitch.
> This means "just turn on vSwitch" or "turn on vSwitch and turn off Linux
> Bridge"?
The latter.

> "A  network is a virtual Ethernet switch on a XenServer host."
> Does the virtual Ethernet switch the same as the virtual bridge created by
> "ovs-vsctl add-br"?
which virtual Ethernet switch is being referred to here? OVS switches
are compatible with standard linux bridges, but OVS adds more
features. You may want to discuss the finer points of this with the
ovs-discuss mailing list.

> From administrator's guide, there are 4 types of network in XenServer.
> It seems that only cross-server private network needs Open vSwitch, which is
> managed by vSwitch Controller.
> (Another 3 networks use Linux bridge?)
> However, XCP does not support cross-server private network.
> I think it is because vSwitch Controller is a commercial product.
> Does this mean Citrix does not provide XCP users a way/tool to control Open
> vSwitch?

Right, the Citrix vSwitch Controller is a commercial product (as far
as I know). My guess is that it doesn't come as a standalone product,
but instead is included with the commercial (non-free) version of
Citrix XenServer. You could ask in the Citrix XenServer forums for

> Or Citrix does not plan to bring benefits of Open vSwitch to XCP, therefore
> does not integrate Open vSwitch and XCP completely?

I think that it would be nice for the possibility of adding on the
commercial controller to XCP, but as of now I don't think there is any
support for that.

> XCP users only have to use ovs- commands (from Todd and admin@xxxxxxxxxxx,
> ovs commands may confuse XAPI) or OpenFlow controllers to complete what
> vSwitch Controller does?

Right. At this point on XCP you are probably forced to roll your own
controller solution. You should discuss this on the nox, openflow, and
open vSwitch mailing lists for what your options are.

see also:

I don't actually see the vSwitch controller on there as an item, but I
think we should sort this point out and add it.


> Thanks a lot.
> Regards,
> Wayne
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

Todd Deshane

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.