|
I have been trying to get xen v4.1 to work on my server, but without much success. It seems that the bridge virbr0 is either not configured properly and/or blocked, or I need one more bridge such as: xenbr0. Please help solve this issue. Here are the results of the commands:
[root@zserver]# brctl show
bridge name bridge id STP enabled interfaces
virbr0 8000.feffffffffff yes vif6.0
[root@zserver]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:D5:AF:77:FR
inet addr:70.50.188.15 Bcast:70.50.188.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:feef:77dc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:183163 errors:0 dropped:0 overruns:0 frame:0
TX packets:107889 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:268952604 (256.4 MiB) TX bytes:8601732 (8.2 MiB)
Interrupt:16 Memory:f8000000-f8012800
eth1 Link encap:Ethernet HWaddr 00:15:C5:EF:77:DE
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:16 Memory:f4000000-f4012800
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:156 errors:0 dropped:0 overruns:0 frame:0
TX packets:397 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:4584 (4.4 KiB) TX bytes:20996 (20.5 KiB)
virbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:91429 errors:0 dropped:0 overruns:0 frame:0
TX packets:154637 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5259611 (5.0 MiB) TX bytes:233983973 (223.1 MiB)
[root@zserver]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 70.50.188.254 0.0.0.0 UG 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1003 0 0 eth0
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
70.50.188.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
Is there something missing or need editing?
|
