Re: [Xen-users] PVUSB - how to?

[James Harper <james.harper@xxxxxxxxxxxxxxxx>]

It looks like you are testing without the debug build of the drivers. With log 
throttling turned off you should be able to run the debug build without too 
much slowing down.

If you can do that and just try adding the first usb device (the wireless HID 
should be fine) then shut down and send me the logfile I'll have a look at it.

Can you then start up again and add the mouse? I have definitely had the mouse 
working properly before but maybe the wireless HID device crashed it preventing 
adding the second device from working.

I've basically only implemented the USB functions I've been able to test - 
there are lots more functions probably missing but they should be easy enough 
to add.

James

> -----Original Message-----
> From: Likarpenkov Alexander [mailto:al@xxxxxxxxxxxxxxx]
> Sent: Monday, 16 January 2012 11:54 PM
> To: James Harper; xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-users] PVUSB - how to?
> 
> RESULTS: NOT WORKED Properly 0.11.0.357
> 
> About process:
> I'm changed startup config from:
> device_model = '/usr/lib/xen/bin/qemu-dm'
> to
> device_model = '/usr/lib64/xen/bin/qemu-dm.nothrottle'
> See in attach qemu-dm.nothrottle
> ANd log:
> qemu: ignoring not-understood drive `/local/domain/10/log-throttling'
> medium change watch on `/local/domain/10/log-throttling' - unknown
> device, ignored
> 
> 
> after loading domU:
> See in attach 01.jpg
> # xm usb-hc-create v3 2 8
> See in attach 02.jpg
> 
> # xm usb-list-assignable-devices
> 1-4.3        : ID 04f3:0a01 Elan USB Phone
> 1-4.4        : ID 046d:c05b Logitech USB Optical Mouse
> 3-3          : ID 04f2:0200 Chicony USB Wireless HID Receiver
> 5-3          : ID 07d1:f101 Broadcom Corp D-Link DBT-122
> 
> # xm usb-attach v3 0 1 3-3
> See in attach 03.jpg
> 
> # xm usb-attach v3 0 2 1-4.3
> NO ACTION, but:
> # xm usb-list v3
> Idx BE  state usb-ver  BE-path
> 0   0   4     USB2.0  /local/domain/0/backend/vusb/10/0
> port 1: 3-3 [ID 04f2:0200 Chicony USB Wireless HID Receiver]
> port 2: 1-4.3 [ID 04f3:0a01 Elan USB Phone]
> port 3:
> port 4:
> port 5:
> 
> #  xm usb-attach v3 0 3 1-4.4
> See in attach 04.jpg
> 
> 
> # xm usb-attach v3 0 4 5-3
> BlueTooth added properly
> See in attach 05.jpg
> And really search devices
> See in attach 06.jpg
> But after adding BSOD:
> See in attach 07.jpg

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users