[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Making a WAP


It shows up in lspci. To get it to behave as a master, I had to use hostapd. I won't really need xen to be aware of this one now - I just write some iptables on murder to NAT wireless traffic to ppp0 or route to and from incest.


On 21 June 2012 01:16, Alexandre Kouznetsov <alk@xxxxxxxxxx> wrote:

El 19/06/12 23:15, Adrian May escribiÃ:

Thanks for your help so far. My mainboard is Asus E45M1 which has an AMD
Fusion E450 processor (AMD-V but probably not Vi), one ethernet port and
an onboard wireless N.
You probably want to check, if your Wireless card is really a PCI. It might be a USB, even if it's not a separate device connected to a physical port. lspci ans lsusb are the tools.

Asus use to (or at least used to) integrate onboard wifi and audio via USB interface instead of the usual PCI. If that is your case, obviously it's not a PCI Passthrough what you need, but USB Passthrough. Works with HVM DomU, never tried with a PV DomU.

(guys, don't CC me, i read the list)

Alexandre Kouznetsov

Xen-users mailing list

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.