[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] Unable to boot HVM DomU (custom OS) using Xen 4.1.4 (x86)


  • To: xen-users@xxxxxxxxxxxxx
  • From: Stefan Vroom <smavroom@xxxxxxxxx>
  • Date: Thu, 13 Mar 2014 11:57:56 +0100
  • Delivery-date: Fri, 14 Mar 2014 11:42:12 +0000
  • List-id: Xen user discussion <xen-users.lists.xen.org>

Hello Xen community,

I am working for a company and try and virtualise our own 32-bit Unix based real-time operating system. However I am new to the field of virtualisation. I followed some tutorials to try to get our OS running as HVM on Xen. But I run into the following erros:

Using command:
xm dmesg

Gives:
(XEN) Xen version 4.1.4 (Debian 4.1.4-3+deb7u1) (carnil@xxxxxxxxxx) (gcc version 4.7.2 (Debian 4.7.2-5) ) Fri May 10 07:22:47 UTC 2013
(XEN) Bootloader: GRUB 1.99-27+deb7u2
(XEN) Command line: placeholder dom0_max_vcpus=1 dom0_vcpus_pin
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009d800 (usable)
(XEN)  000000000009d800 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bac8f000 (usable)
(XEN)  00000000bac8f000 - 00000000bade2000 (reserved)
(XEN)  00000000bade2000 - 00000000badea000 (ACPI NVS)
(XEN)  00000000badea000 - 00000000baf1f000 (reserved)
(XEN)  00000000baf1f000 - 00000000baf9f000 (ACPI NVS)
(XEN)  00000000baf9f000 - 00000000bafff000 (ACPI data)
(XEN)  00000000bafff000 - 00000000bb000000 (usable)
(XEN)  00000000bb000000 - 00000000bfa00000 (reserved)
(XEN)  00000000f8000000 - 00000000fc000000 (reserved)
(XEN)  00000000fec00000 - 00000000fec01000 (reserved)
(XEN)  00000000fed08000 - 00000000fed09000 (reserved)
(XEN)  00000000fed10000 - 00000000fed1a000 (reserved)
(XEN)  00000000fed1c000 - 00000000fed20000 (reserved)
(XEN)  00000000fee00000 - 00000000fee01000 (reserved)
(XEN)  00000000ffd80000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 000000013e9ff000 (usable)
(XEN)  000000013e9ff000 - 000000013fe00000 (reserved)
(XEN) System RAM: 3990MB (4085936kB)
(XEN) ACPI: RSDP 000F00E0, 0024 (r2 DELL  )
(XEN) ACPI: XSDT BAFFE120, 008C (r1 DELL    QA09           2 LOHR        2)
(XEN) ACPI: FACP BAFF0000, 00F4 (r3 DELL    QA09           2 PTL         2)
(XEN) ACPI: DSDT BAFF3000, 8FB3 (r2 DELL    SNB-CPT        0 INTL 20061109)
(XEN) ACPI: FACS BAF40000, 0040
(XEN) ACPI: SLIC BAFFD000, 0176 (r1 DELL    QA09           2 LOHR        1)
(XEN) ACPI: SSDT BAFFC000, 0166 (r1 DELL   PtidDevc     1000 INTL 20061109)
(XEN) ACPI: ASF! BAFF2000, 00A5 (r32 DELL    QA09           2 PTL         2)
(XEN) ACPI: HPET BAFEF000, 0038 (r1 DELL    QA09           2 PTL         2)
(XEN) ACPI: APIC BAFEE000, 0098 (r1 DELL    QA09           2 PTL         2)
(XEN) ACPI: MCFG BAFED000, 003C (r1 DELL    QA09           2 PTL         2)
(XEN) ACPI: SSDT BAFEB000, 12AD (r1 NvORef NvOptTbl     1000 INTL 20061109)
(XEN) ACPI: SSDT BAFEA000, 090C (r1  PmRef  Cpu0Ist     3000 INTL 20061109)
(XEN) ACPI: SSDT BAFE9000, 0996 (r1  PmRef    CpuPm     3000 INTL 20061109)
(XEN) ACPI: UEFI BAFE8000, 003E (r1 DELL    QA09           2 PTL         2)
(XEN) ACPI: UEFI BAFE7000, 0042 (r1 PTL      COMBUF        1 PTL         1)
(XEN) ACPI: UEFI BAFE6000, 026A (r1 DELL    QA09           2 PTL         2)
(XEN) Xen heap: 9MB (9764kB)
(XEN) Domain heap initialised
(XEN) Processor #0 6:10 APIC version 21
(XEN) Processor #1 6:10 APIC version 21
(XEN) Processor #2 6:10 APIC version 21
(XEN) Processor #3 6:10 APIC version 21
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) Table is not found!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2095.309 MHz processor.
(XEN) I/O virtualisation disabled
(XEN) Enabled directed EOI with ioapic_ack_old on!
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using old ACK method
(XEN) Platform timer is 14.318MHz HPET
(XEN) Allocated console ring of 16 KiB.
(XEN) VMX: Supported advanced features:
(XEN)  - APIC MMIO access virtualisation
(XEN)  - APIC TPR shadow
(XEN)  - Extended Page Tables (EPT)
(XEN)  - Virtual-Processor Identifiers (VPID)
(XEN)  - Virtual NMI
(XEN)  - MSR direct-access bitmap
(XEN)  - Unrestricted Guest
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging (HAP) detected
(XEN) HVM: HAP page sizes: 4kB, 2MB
(XEN) Brought up 4 CPUs
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 32-bit, PAE, lsb
(XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1786000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   0000000138000000->000000013a000000 (963846 pages to be allocated)
(XEN)  Init. ramdisk: 000000013d056000->000000013e7ff800
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c1000000->c1786000
(XEN)  Init. ramdisk: c1786000->c2f2f800
(XEN)  Phys-Mach map: c2f30000->c32eb2c0
(XEN)  Start info:    c32ec000->c32ec47c
(XEN)  Page tables:   c32ed000->c330c000
(XEN)  Boot stack:    c330c000->c330d000
(XEN)  TOTAL:         c0000000->c3400000
(XEN)  ENTRY ADDRESS: c141b000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 188kB init memory.
(XEN) mm.c:918:d0 Error getting mfn 3809d (pfn bf74d) from L1 entry 000000003809d023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:918:d0 Error getting mfn 3809e (pfn bf74e) from L1 entry 000000003809e023 for l1e_owner=0, pg_owner=0
(XEN) mm.c:918:d0 Error getting mfn 3809f (pfn bf74f) from L1 entry 000000003809f023 for l1e_owner=0, pg_owner=0
(XEN) physdev.c:168: dom0: wrong map_pirq type 3

Using command:

cat /var/log/xen/qemu-dm-gp.log

Gives:

domid: 4
-c config qemu network with xen bridge for
vif4.0-emu xenbr0
Using file /usr/images/gp.img in read-write mode
Watching /local/domain/0/device-model/4/logdirty/cmd
Watching /local/domain/0/device-model/4/command
Watching /local/domain/4/cpu
char device redirected to /dev/pts/0
qemu_map_cache_init nr_buckets = 4000 size 327680
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 018df513-c808-f1d7-1a7c-d87576dc28b4
Time offset set 0
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/4/xen_extended_power_mgmt): read error
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
vcpu-set: watch node error.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/4/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/4/log-throttling'
medium change watch on `/local/domain/4/log-throttling' - unknown device, ignored
char device redirected to /dev/pts/1
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
xen be: console-0: xen be: console-0: initialise() failed
initialise() failed
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.

Finally my 'gp.cfg':

kernel = "/usr/lib/xen-4.1/boot/hvmloader"
builder='hvm'
memory=256
vcpus=4
name="gp"
vif=['bridge=xenbr0']
disk=['file:/usr/images/gp.img,hda,w']
acpi=1
device_model= 'qemu-dm'
boot="d"
sdl=0
serial='pty'
vnc=0



What am I doing wrong? Did I miss something in my CFG? Should I upgrade to a newer Xen version? Please let me know! Thanks in advance. ;)

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.