Re: [Xen-users] Booting dom0 on OMAP5432 board

[manul <konstantin.belov@xxxxxxxxx>]

Hi, 
 I took U-Boot settings from wiki page and they look as follow:

setenv xen_image xen-uImage;
setenv dtb_file omap5-uevm.dtb;
setenv linux_image zImage-ram;
setenv dtb_addr_r 0x825f0000;
setenv xen_addr_r 0x90000000;
setenv kernel_addr_r 0xa0000000
setenv bootcmd 'bootm $xen_addr_r - $dtb_addr_r'
setenv xen_bootargs 'sync_console console=dtuart dtuart=serial2'
setenv dom0_bootargs "console=hvc0 debug ignore_loglevel root=/dev/mmcblk0p2
rw rootwait init=/sbin/init fixrtc"
fatload mmc 0:1 $dtb_addr_r $dtb_file;
fatload mmc 0:1 $xen_addr_r $xen_image;
fatload mmc 0:1 $kernel_addr_r $linux_image;
fdt addr $dtb_addr_r;
fdt resize;
fdt set /chosen xen,xen-bootargs \"$xen_bootargs\"
fdt resize;
fdt set /chosen xen,dom0-bootargs \"$dom0_bootargs\"
fdt mknode /chosen modules
fdt set /chosen/modules \#address-cells <1>
fdt set /chosen/modules \#size-cells <1>
fdt mknode /chosen/modules module@0
fdt set /chosen/modules/module@0 compatible xen,linux-zimage
xen,multiboot-module
fdt set /chosen/modules/module@0 reg <$kernel_addr_r 0xa00000>

Also I tried early_printk for Linux, but it didn't help - no output at all.

linux_config.linux_config
<http://xen.1045712.n5.nabble.com/file/n5724834/linux_config.linux_config>  
dtsi.diff <http://xen.1045712.n5.nabble.com/file/n5724834/dtsi.diff>  



--
View this message in context: 
http://xen.1045712.n5.nabble.com/Booting-dom0-on-OMAP5432-board-tp5722709p5724834.html
Sent from the Xen - User mailing list archive at Nabble.com.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users