Re: [Xen-users] Booting dom0 on OMAP5432 board

[Julien Grall <julien.grall@xxxxxxxxxx>]

Hello,

Adding Chen Baozi. He did the port of this board on Xen.

Regards,

On 23/09/2014 21:17, manul wrote:
> Hi,
>   I took U-Boot settings from wiki page and they look as follow:
>
> setenv xen_image xen-uImage;
> setenv dtb_file omap5-uevm.dtb;
> setenv linux_image zImage-ram;
> setenv dtb_addr_r 0x825f0000;
> setenv xen_addr_r 0x90000000;
> setenv kernel_addr_r 0xa0000000
> setenv bootcmd 'bootm $xen_addr_r - $dtb_addr_r'
> setenv xen_bootargs 'sync_console console=dtuart dtuart=serial2'
> setenv dom0_bootargs "console=hvc0 debug ignore_loglevel root=/dev/mmcblk0p2
> rw rootwait init=/sbin/init fixrtc"
> fatload mmc 0:1 $dtb_addr_r $dtb_file;
> fatload mmc 0:1 $xen_addr_r $xen_image;
> fatload mmc 0:1 $kernel_addr_r $linux_image;
> fdt addr $dtb_addr_r;
> fdt resize;
> fdt set /chosen xen,xen-bootargs \"$xen_bootargs\"
> fdt resize;
> fdt set /chosen xen,dom0-bootargs \"$dom0_bootargs\"
> fdt mknode /chosen modules
> fdt set /chosen/modules \#address-cells <1>
> fdt set /chosen/modules \#size-cells <1>
> fdt mknode /chosen/modules module@0
> fdt set /chosen/modules/module@0 compatible xen,linux-zimage
> xen,multiboot-module
> fdt set /chosen/modules/module@0 reg <$kernel_addr_r 0xa00000>
>
> Also I tried early_printk for Linux, but it didn't help - no output at all.
>
> linux_config.linux_config
> <http://xen.1045712.n5.nabble.com/file/n5724834/linux_config.linux_config>
> dtsi.diff <http://xen.1045712.n5.nabble.com/file/n5724834/dtsi.diff>
>
>
>
> --
> View this message in context: 
> http://xen.1045712.n5.nabble.com/Booting-dom0-on-OMAP5432-board-tp5722709p5724834.html
> Sent from the Xen - User mailing list archive at Nabble.com.
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxx
> http://lists.xen.org/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users