[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] [xen-4.6-ARM][Renesas-Lager Board] Fail to enter rootfs on DOM0 after setting XEN



Hello,Â

I had tried to get Dom0 shell with simple initramfs. but it was not working on xen.
In case of without-Xen, linux with similar setting(the difference is for bootargs for dom0 and xen) is working well.

I hope, anvody help me to solve about "how to get the shell for DOM0 on lager board"?Â

BR.

ÂÂ

2015-11-03 21:20 GMT+09:00 Julien Grall <julien.grall@xxxxxxxxxx>:
On 03/11/15 05:53, ììí wrote:
> Hello,

Hello,

> I checked network for tftp booting on uboot and was very good work.
> But I don't know how to check network on xen before booting DOM0.
>
> I tried to switch console to xen before booting DOM0 with three times
> "CTRL+a", but I didn't got console prompt on xen.
>
> I hope you let me know what to do to check.

By "check network on Xen" I meant testing the network is working in DOM0.

In your test case, you are directly trying to use a filesystem from NFS.
But you don't even know if the network driver is fully working on Xen.

You should try to narrow down your test case in something that don't
involve many drivers. For instance using an initramfs for your rootfs
(see buildroot/busybox). The initramfs doesn't involve neither network
nor the disk.

The first step will be to get up to the shell and then if you can test
network as on baremetal.

Regards,

--
Julien Grall



--
Happy Virus....
ì ìíÂ
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.