Excellent, thank you.
> Date: Thu, 14 May 2015 15:08:50 +0100
> From: sheets@xxxxxxxxxxxx
> To: anil@xxxxxxxxxx
> CC: mirageos-devel@xxxxxxxxxxxxxxxxxxxx
> Subject: Re: [MirageOS-devel] simple dns server
>
> Both of the issues raised in this thread were reported and tracked at
>
> <https://github.com/mirage/ocaml-dns/issues/67>
> <https://github.com/mirage/ocaml-dns/issues/69>
>
> Luke Dunstan and I submitted patches to address them. Luke also wrote
> some nice tests.
>
> Subsequently, dns.0.15.0 was released this afternoon which includes
> both of these fixes (and a revised Name module interface).
>
> Happy hacking!
>
> David
>
> On Tue, May 12, 2015 at 4:12 PM, Anil Madhavapeddy <anil@xxxxxxxxxx> wrote:
> > It's not obvious, but that particular zone file came from a regression test
> > of the original OCaml DNS library written in 2006, and so is an odd choice
> > (my fault) for an example zone file!
> >
> > Feel free to change it around to something a little more accessible. The
> > other thing missing from the DNS library is a more natural way to add and
> > remove records without going through a zone file, and so that's a good area
> > for improvement.
> >
> > Now that the TLS stack is up and running, I'm going to move the mirage.io
> > DNS over to a unikernel as well. We used to run the DNS self-hosted, but it
> > has migrated to Gandi recently. The GitHub workflow is proving to be quite
> > an effective deployment interface, and so we're in good shape to bring back
> > the hosted DNS as well. It just needs a good logging interface (c.f. the
> > other thread), but for now I'll capture the console output.
> >
> > -anil
> >
> >
> > On 11 May 2015, at 11:29, Mindy <mindy@xxxxxxxxxxxxxxxxxxx> wrote:
> >
> > Hm, I had this same problem. I was able to get the server to run by making
> > the following changes to data/test.zone (although the initialization still
> > complains about unknown services in other lines):
> >
> > on line 55, s/udp/17/
> >
> > Then, rerun `mirage configure --unix` and `make`. After doing that and
> > starting the server, I'm able to get a response from `dig @127.0.0.1
> > ns0.d1.signpo.st.` (127.0.0.1 because I'm running in socket mode).
> >
> > Cheers,
> > Mindy
> >
> > On 05/11/2015 11:06 AM, Nick Betteridge wrote:
> >
> > Hello
> >
> > I'm trying to get the simple dns server to work that Heidi has in her
> > examples (github.com/heidi-ann/ocaml-dns-examples) and I'm getting an error
> > which I don't really understand - it's occurs both on the cubieboard and my
> > amd64 desktop:
> >
> > [amd64]
> > $ sudo ./mir-dns
> > Manager: connect
> > plugging into tap0 with mac c2:9d:56:19:d7:2c..
> > Netif: connect tap0
> > Manager: connect
> > Manager: configuring
> > Manager: configuring
> > Netif: error, terminating listen loop
> > Manager: Interface to 192.168.1.2 nm 255.255.255.0 gw [192.168.1.254]
> >
> > Manager: socket config currently ignored (TODO)
> > ARP: sending gratuitous from 192.168.1.2
> > Manager: configuration done
> > Warning (<string> line 47): Converting MD to MX
> > Warning (<string> line 48): Converting MF to MX
> > Error (<string> line 54): udp is not a known IP protocol
> > Error (<string> line 56): unknown service "chargen" for protocol 6
> > Warning (<string> line 47): Converting MD to MX
> > Warning (<string> line 48): Converting MF to MX
> > Error (<string> line 54): udp is not a known IP protocol
> > Error (<string> line 56): unknown service "chargen" for protocol 6
> > Netif: error, terminating listen loop
> >
> > [cubieboard2]
> > $ sudo ./mir-dns
> > plugging into tap0 with mac c2:9d:56:19:d7:2c..
> > Netif: connect tap0
> > Manager: connect
> > Manager: connect
> > Manager: configuring
> > Manager: Interface to 192.168.1.2 nm 255.255.255.0 gw [192.168.1.1]
> >
> > ARP: sending gratuitous from 192.168.1.2
> > Manager: configuration done
> > Manager: configuring
> > Warning (<string> line 47): Converting MD to MX
> > Warning (<string> line 48): Converting MF to MX
> > Error (<string> line 54): udp is not a known IP protocol
> > Error (<string> line 56): unknown service "chargen" for protocol 6
> > Manager: socket config currently ignored (TODO)
> > Warning (<string> line 47): Converting MD to MX
> > Warning (<string> line 48): Converting MF to MX
> > Error (<string> line 54): udp is not a known IP protocol
> > Error (<string> line 56): unknown service "chargen" for protocol 6
> >
> >
> > Does anyone have any idea how I can move forward on this?
> >
> > Thanks
> > Nick
> >
> >
> > _______________________________________________
> > MirageOS-devel mailing list
> > MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
> > http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel
> >
> >
> > _______________________________________________
> > MirageOS-devel mailing list
> > MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
> > http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel
> >
> >
> >
> > _______________________________________________
> > MirageOS-devel mailing list
> > MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
> > http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel
> >
>
> _______________________________________________
> MirageOS-devel mailing list
> MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
> http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel
