[Xen-devel] Re: Booting Xen/ia64

[Håvard Bjerke <havarbj@xxxxxxxxxxx>]

We tried the *.good binaries, and we're making progress. But something is wrong 
with the timer:

Starting: Scientific Linux CERN

ELILO boot:
Loading xen.good...Loading Linux... ..done
Loading initrd xenlinux.good...done
Linux version 2.6.9 (djm@sportsman) (gcc version 3.2.3 20030502 (Red Hat 
Linux 3.2.3-34)) #1 SMP Tue Dec 7 21:25:04 MST 2004
EFI v1.00 by Xen/ia64: SALsystab=0x8000178 ACPI 2.0=0x3fb2e000 
SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
warning: unable to switch EFI into virtual mode (status=9223372036854775811)
No I/O port range found in EFI memory map, falling back to AR.KR0
I/O port base = 0x0
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
get_max_cacheline_size: ia64_pal_cache_summary() failed (status=-1)
PAL_VM_PAGE_SIZE failed with status=-1;defaulting to architected purge 
page-sizes.
cpu_init: PAL VM summary failed, assuming 18 RID bits
ACPI: Local APIC address c0000000fee00000
GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
2 CPUs available, 2 CPUs total
PCDP: 0xe00000003fb2c000
GSI 82 (level, low) -> CPU 0 (0x0000) vector 49
PCDP: serial console at MMIO 0xf8030000 (ttyS0, options 960Built 1 zonelists
Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\xen.good nomca 
console=simcons console=ttyS0 console=tty0 rv/sda2 ro
PID hash table entries: 2048 (order: 11, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
Memory: 507520k/523264k availab(6783k code, 15392k reserved, 3281k data, 
208k init)
McKinley Errata 9 workaround not needed; disabling it
Mount-cache hash tatries: 1024 (order: 0, 16384 bytes)
Boot processor id 0x0/0x0
task migration cache decay timeout: 10 msecs.

************* SYSTEM ALERT **************
SYSTEM NAME: moplapro05

12 Jan 2005 08:19:04
Alert Level 3: Warning
Keyword: BOOT_SLAVE_NO_FINAL_WAKEUP_VECTOR
Slave wakeup before vector registered
Logged by: System Firmware 1
Data: Implementation dependent data field
0x7680005B01E00750 0000000000000001

A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:x
*****************************************

CAUTION: System Alerts have been disabled. This will re-enable with
a re-boot or power-on of the system. To re-enable system alerts now, you
may use the AC (Alert Display Configuration) command.

************* SYSTEM ALERT **************
Alert messages are now disabled. Enter Commands Interface AC command to 
enable them again
*****************************************
Processor 0x1/0x100 is stuck.
Brought up 1 CPUs
Total of 1 processors activated (1305.32 BogoMIPS).
NET: Registered protocol family 16
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Root Bridge [PCI1] (00:20)
ACPI: PCI Root Bridge [PCI2] (00:40)
ACPI: PCI Root Bridge [PCI3] (00:60)
ACPI: PCI Root Bridge [PCI4] (00:80)
ACPI: PCI Root Bridge [PCI6] (00:c0)
ACPI: PCI Root Bridge [PCI7] (00:e0)
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 16 (level, low) -> CPU 0 (0x0000) vector 50
ACPI: PCI interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 50
GSI 17 (level, low) -> CPU 0 (0x0000) vector 51
ACPI: PCI interrupt 0000:00:01.1[B] -> GSI 17 (level, low) -> IRQ 51
GSI 18 (level, low) -> CPU 0 (0x0000) vector 52
ACPI: PCI interrupt 0000:00:01.2[C] -> GSI 18 (level, low) -> IRQ 52
GSI 21 (level, low) -> CPU 0 (0x0000) vector 53
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 53
GSI 20 (level, low) -> CPU 0 (0x0000) vector 54
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 54
GSI 27 (level, low) -> CPU 0 (0x0000) vector 55
ACPI: PCI interrupt 0000:20A] -> GSI 27 (level, low) -> IRQ 55
GSI 28 (level, low) -> CPU 0 (0x0000) vector 56
ACPI: PCI interrupt 0000:20:01.1[B] -> GSIevel, low) -> IRQ 56
GSI 29 (level, low) -> CPU 0 (0x0000) vector 57
ACPI: PCI interrupt 0000:20:02.0[A] -> GSI 29 (level, low> IRQ 57
GSI 60 (level, low) -> CPU 0 (0x0000) vector 58
ACPI: PCI interrupt 0000:81:00.0[A] -> GSI 60 (level, low) -> IRQ 58
: PCI interrupt 0000:e0:01.0[A] -> GSI 82 (level, low) -> IRQ 49
ACPI: PCI interrupt 0000:e0:01.1[A] -> GSI 82 (level, low) ->
GSI 83 (level, low) -> CPU 0 (0x0000) vector 59
ACPI: PCI interrupt 0000:e0:02.0[A] -> GSI 83 (level, low) -> IRQ 59
IOC: zx1 2.2 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
perfmon: version 2.0 IRQ 238
perfmon: Generic PMU detected, 8 PMCsMDs, 4 counters (32 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: d_format v2.0 registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
InitializiCryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
radeonfb_pci_register BEGIN
ACPI: PCI interrupt 0000:e0:02.0[A] -> GSI 83 (level, low) -> IRQ 59
radeonfb: probed DDR SGRAM 16videoram
radeonfb: mapped 16384k videoram
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=166.00 Mhz, 
System=166.00 MHz
1 chips in connector info
- chip 1 has 2 connectors
* connector 0 of type 2 (CRT) : 2300
* connector 1 of type 3 (DVI-I) : 3201
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 3) ... found CRT display
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 2) ... not found
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 3) ... found CRT display
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
EDID checksum failed, aborting
EDID checksum failed, aborting
hStart = 664, hEnd = 760, hTotal = 800
vStart = 491, vEnd = 493, vTotal = 525
h_total_disp = 0x4f0063 hsync_strt_wid = 0x8c02a2
v_total_disp = 0x1df020c vsync_strt_wid = 0x8201ea
pixclock = 39721
freq = 2517
post div = 0x3
fb_div = 0x1bf
ppll_div_3 = 0x301bf
lvds_gen_cntl: 08000008
Console: switching to colour frame buffer device 80x30
radeonfb: ATI Radeon QY DDR SGRAM 16 MB
radeonfb_pci_register END
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THM0] (27 C)
EFI Time Services Driver v0.4
Linux agpgart interface v0.100 (c) Dave Jones
ACPI: PCI interrupt 0000:e0:02.0[A] -> GSI 83 (level, low) -> IRQ 59
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies 
Inc Radeon RV100 QY [Radeon 7000/VE]
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
Oops: timer tick before it's due (itc=5ded434d11,itm=5ded50805d)
Oops: timer tick before it's due (itc=5dedf3b2f6,itm=5dedfed84f)
Oops: timer tick before it's due (itc=5deea05221,itm=5deead3041)
Oops: timer tick before it's due (itc=5def4c3e1a,itm=5def4e1ef9)
Oops: timer tick before it's due (itc=5deff261ef,itm=5deffc76eb)
Oops: timer tick before it's due (itc=5df094b391,itm=5df09d65a3)
Oops: timer tick before it's due (itc=5df131d882,itm=5df13e545b)
Oops: timer tick before it's due (itc=5df1cf08a9,itm=5df1d1d9d9)
Oops: timer tick before it's due (itc=5df26c44b5,itm=5df272c891)
Oops: timer tick before it's due (itc=5df309a628,itm=5df313b749)
[...]
and so on...



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel