[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] RE: Booting Xen/ia64



Just to rule out compiler/build differences, I posted the
actual bits I am using successfully on an rx2600 on
the ftp site, called xenlinux.good and xen.good.  (Rename
or add a new entry in elilo.conf).  For me, these bits spew
plenty of early output to the serial port but nothing
to the VGA after elilo until Xenlinux starts booting,
after which Xenlinux (domain0) boots all the way to the RedHat
login screen.

Also, I am using Serial A (top serial port).  I seem
to recall some traffic on linux-ia64 that Serial A
and Serial B are mapped to ttyS0 and ttyS1 somewhat
dynamically so it may be possible that Linux (and elilo)
are talking to a different port than Xen.

Dan 

> -----Original Message-----
> From: Håvard Bjerke [mailto:havarbj@xxxxxxxxxxx] 
> Sent: Tuesday, January 11, 2005 11:42 AM
> To: Magenheimer, Dan (HP Labs Fort Collins)
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxxxx; andreas.hirstius@xxxxxxx
> Subject: Re: Booting Xen/ia64
> 
> On Tue, Jan 11, 2005 at 10:21:53AM -0800, Magenheimer, Dan 
> (HP Labs Fort Collins) wrote:
> >  
> > > I've then applied the privify tool to the vmlinux kernel.
> > > 
> > > Then I've put the resulting xenolinux and xen binaries into 
> > > /boot/efi/efi/redhat/, made a symlink "ln -s 
> > > /boot/efi/efi/redhat/xen /boot/xen", and put the following in 
> > > /etc/elilo.conf:
> > > 
> > > default=xen
> > > 
> > > image=xen
> > >         label=xen
> > >         initrd=xenlinux
> > >         read-only
> > >         append="nomca console=simcons console=ttyS0 
> > > console=tty0 root=/dev/sda2"
> > > 
> > > However, when I boot nothing happens. This is the output:
> > > 
> > > Loading xen...Loading Linux... ..done                         
> > >                                                           
>           
> > > Loading initrd xenlinux...done                                
> > 
> > Is this on a serial output or on a video screen?  If the latter,
> > try hooking up a serial output (and verify that it works with
> > regular Linux).  It's possible that Xen is booting xenlinux
> > fine and you may eventually see xenlinux output on the video
> > screen.  If not, are you sure "root=/dev/sda2" works for booting
> > standard Linux?
> > 
> 
> This is on both serial and video. And yes, "root=/dev/sda2" 
> works with standard Linux.
> 
> > What hardware are you using?  I have been working with another
> > Xen/ia64 developer (I'll leave it up to him to post and identify
> > himself if he wishes) on a serial problem; Xen/ia64 has a hack for
> > serial output that apparently does not work on his box.  I'm
> > looking into a more generic solution (which got added to Linux/ia64
> > at 2.6.10).
> 
> It's an rx2600.
> 
> 
> Håvard
> 


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.