Re: [Xen-devel] VIF setup

[Mark Williamson <Mark.Williamson@xxxxxxxxxxxx>]

> Please look at this does this look OK?

It's OK.  Because you're using an L2 ethernet bridge, it's not necessary to 
set up any address details for the vif in domain0.

Does it work?

HTH,
Mark

> guest# ifconfig -a
> eth0      Link encap:Ethernet  HWaddr AA:00:00:0C:0E:D9
>           inet addr:172.16.100.1  Bcast:172.16.255.255  Mask:255.255.0.0
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
>
> domain0# ifconfig -a
> eth0      Link encap:Ethernet  HWaddr 00:08:54:08:3E:C7
>           inet addr:w.x.y.z  Bcast:255.255.255.255  Mask:255.255.254.0
>           UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:131747 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:12223 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:15796392 (15.0 Mb)  TX bytes:1114824 (1.0 Mb)
>           Interrupt:9 Base address:0xd000
>
> vif10.0   Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:3345 errors:0 dropped:34 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:0 (0.0 b)  TX bytes:200784 (196.0 Kb)
>
> xen-br0   Link encap:Ethernet  HWaddr 00:08:54:08:3E:C7
>           inet addr:w.x.y.z  Bcast:255.255.255.255  Mask:255.255.255.255
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:131569 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:12221 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:0
>           RX bytes:13934617 (13.2 Mb)  TX bytes:1100770 (1.0 Mb)
>
> The vif interface in domain0 is not initialised correctly, right?
>
>
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel