[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Bad clock ticking in xen0
Hi, I have a problem with too fast clock in dom0. The clock is 3-4times faster than 'real' clock.In users list I got an advice suggesting that it is a hw bug. But I have no other problem with the hw and I hope it is a xen bug (or my misconfiguration) and it can be fixed or workarounded. It happens on a notebook compaq evo N115 (Duron 996MHz).On my desktop with similar configuration there is no problem (xm dmesg attached for both). I tried to locate the bug myself but with no luck :( Could you please suggest some hints where to start debugging? -- Tomas Kouba __ __ _____ ___ ___ \ \/ /___ _ __ |___ / / _ \ / _ \ \ // _ \ '_ \ |_ \| | | | | | | / \ __/ | | | ___) | |_| | |_| | /_/\_\___|_| |_| |____(_)___(_)___/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0.0 (rread@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) Tue Dec 13 15:49:56 PST 2005 Latest ChangeSet: unavailable (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009fc00 (usable) (XEN) 000000000009fc00 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000000fff0000 (usable) (XEN) 000000000fff0000 - 000000000fff3000 (ACPI NVS) (XEN) 000000000fff3000 - 0000000010000000 (ACPI data) (XEN) 00000000ffff0000 - 0000000100000000 (reserved) (XEN) System RAM: 255MB (261692kB) (XEN) Xen heap: 10MB (10648kB) (XEN) PAE disabled. (XEN) found SMP MP-table at 000f5eb0 (XEN) DMI 2.2 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 VIA694 ) @ 0x000f78b0 (XEN) ACPI: RSDT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 (XEN) ACPI: FADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 (XEN) ACPI: MADT (v001 VIA694 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff58c0 (XEN) ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 6:3 APIC version 16 (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 849.618 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 64K (64 bytes/line) (XEN) CPU0: AMD Duron(tm) processor stepping 01 (XEN) Total of 1 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 1 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 01800000->02000000 (55177 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c047e2a0 (XEN) Init. ramdisk: c047f000->c06b7600 (XEN) Phys-Mach map: c06b8000->c06efe24 (XEN) Start info: c06f0000->c06f1000 (XEN) Page tables: c06f1000->c06f4000 (XEN) Boot stack: c06f4000->c06f5000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x238600, start at 0xc047f000 (XEN) Scrubbing Free RAM: ...done. (XEN) Xen trace buffers: disabled (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). __ __ _____ ___ ___ \ \/ /___ _ __ |___ / / _ \ / _ \ \ // _ \ '_ \ |_ \| | | | | | | / \ __/ | | | ___) | |_| | |_| | /_/\_\___|_| |_| |____(_)___(_)___/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0.0 (rread@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.1 20050727 (Red Hat 4.0.1-5)) Tue Dec 13 15:49:56 PST 2005 Latest ChangeSet: unavailable (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009e800 (usable) (XEN) 000000000009e800 - 00000000000a0000 (reserved) (XEN) 00000000000c0000 - 00000000000cc000 (reserved) (XEN) 00000000000dc000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000000eef0000 (usable) (XEN) 000000000eef0000 - 000000000eeff000 (ACPI data) (XEN) 000000000eeff000 - 000000000ef00000 (ACPI NVS) (XEN) 000000000ef00000 - 000000000f000000 (usable) (XEN) 00000000fff80000 - 0000000100000000 (reserved) (XEN) System RAM: 239MB (245304kB) (XEN) Xen heap: 10MB (10652kB) (XEN) PAE disabled. (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f6dd0 (XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x0eefb63b (XEN) ACPI: FADT (v001 COMPAQ EAGLES 0x06040000 PTL_ 0x000f4240) @ 0x0eefeeb6 (XEN) ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x0eefef2a (XEN) ACPI: DSDT (v001 COMAPQ EAGLES 0x06040000 MSFT 0x0100000d) @ 0x00000000 (XEN) Local APIC disabled by BIOS -- you can enable it with "lapic" (XEN) Initializing CPU#0 (XEN) Detected 996.587 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 64K (64 bytes/line) (XEN) CPU0: AMD mobile AMD Duron(tm) Processor stepping 01 (XEN) SMP motherboard not detected. (XEN) Local APIC not detected. Using dummy APIC emulation. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 1 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=xen-3.0,VIRT_BASE=0xC0000000,PAE=no,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 01800000->02000000 (22528 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c0600924 (XEN) Init. ramdisk: c0601000->c0601000 (XEN) Phys-Mach map: c0601000->c0619000 (XEN) Start info: c0619000->c061a000 (XEN) Page tables: c061a000->c061d000 (XEN) Boot stack: c061d000->c061e000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Scrubbing Free RAM: ...done. (XEN) Xen trace buffers: disabled (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |