[PATCH 2/7] xen/arm32: head: Add mising isb in switch_to_runtime_mapping()

[Julien Grall <julien@xxxxxxx>]

From: Julien Grall <jgrall@xxxxxxxxxx>

Per the Arm Arm (ARM DDI 0406C.d A3.8.3):

"The DMB and DSB memory barriers affect reads and writes to the memory
system generated by load/store instructions and data or unified cache
maintenance operations being executed by the processor. Instruction
fetches or accesses caused by a hardware translation table access are
not explicit accesses."

The function switch_to_runtime_mapping() is responsible to map the
Xen at its runtime address if we were using the temporary area before
jumping returning using a runtime address. So we need to ensure the
'dsb' has completed before continuing. Therefore add an 'isb'.

Fixes: fbd9b5fb4c26 ("xen/arm32: head: Remove restriction where to load Xen")
Signed-off-by: Julien Grall <jgrall@xxxxxxxxxx>
---
 xen/arch/arm/arm32/head.S | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S
index 6ca3329138e3..b942e7e54d08 100644
--- a/xen/arch/arm/arm32/head.S
+++ b/xen/arch/arm/arm32/head.S
@@ -656,6 +656,11 @@ switch_to_runtime_mapping:
 
         /* Ensure any page table updates are visible before continuing */
         dsb   nsh
+        /*
+         * The function will return on the runtime mapping. So we want
+         * to prevent instruction fetch before the dsb completes.
+         */
+        isb
 
 ready_to_switch:
         mov   pc, lr
-- 
2.40.1