[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-users] VNC to HVM not starting
- To: "Artur Linhart - Linux communication" <AL.LINUX@xxxxxxxxxxx>
- From: "trilok nuwal" <tc.nuwal@xxxxxxxxx>
- Date: Thu, 20 Sep 2007 16:04:18 +0530
- Cc: Philippe Vanhaesendonck <xen@xxxxxxxxxxx>, Dylan Martin <dmartin@xxxxxxxxxxxx>, Scott Serr <serrs@xxxxxxxxxxxx>, "Alessandro R." <lord2y@xxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
- Delivery-date: Thu, 20 Sep 2007 03:35:38 -0700
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=mllIAb7WhJM5jefaPvlviK/YONmQpNVtXS4SDj1Hko2FKlKACZDyPKuzw6SPZ2s2O0MkAHmbKFdm+TQsocyLiOV69R/krjx/4d81xJeLePvl5cxmWXukKeEXxY3oFqOfSUuZt8t2/6XdfC5G097O3QwzkErgiACrhrJROFC7fsw=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
>From my experience :
when
vnc=1
vnclisten='IP_of_my_xen_server
vncdisplay=4 vncunused=0
Always allocate the port 5900 (standard VNC) + 4 (vncdisplay) = 5904
for the display. If it is used by soem other application this will just
hang.
vnc=1
vnclisten='IP_of_my_xen_server
vncdisplay=4 vncunused=1
allocate the port 5900 (standard VNC) + 4 (vncdisplay) = 5904
for the display if it is free else allocate other free port.
vnc=1
vnclisten='IP_of_my_xen_server
vncunused=1/0
allocate free port.
Please correct me if my understanding is wrong.
Thanks,
Trilok
On 9/20/07, Artur Linhart - Linux communication <AL.LINUX@xxxxxxxxxxx> wrote:
Hello,
Yes, thank You very much, it is it :-)
So, for me the following configuration
vnc=1
vnclisten='IP_of_my_xen_server' # Here place IP of the Xen server
vncdisplay=4
vncunused=0
causes the Xen server listens on the given IP on the port
5900 (standard VNC) + 4 (vncdisplay) = 5904
And I can vonnect to it through the VNC viewer!
:-)
The "display" value seems to be valid at least also for the number 21 and
port 5921 (I do not know if there is some max display number)
Dylan, I propose to place such an example into the FAQ You are creating,
sure, if it is not already there ;-)
With best regards
Artur
-----Original Message-----
From: Philippe Vanhaesendonck [mailto:xen@xxxxxxxxxxx]
Sent: Wednesday, September 19, 2007 11:21 PM
To: Artur Linhart - Linux communication
Cc: 'Scott Serr'; 'Alessandro R.'; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] VNC to HVM not starting
Be aware that tere seems to be some precedence in the parameters.
If my memory serves well, you must set vncunused to 0 if you want
vncdisplay to be considered.
/P.
Artur Linhart - Linux communication wrote:
> Hello,
>
> I've tested it and this is not true what I said and thought, it
> seems to be the fact the display is not influencing the port...
>
> What does it influence, dies anybody know it? Is it a "bug or a
> feature"? What is then the purpose of the vncdisplay option in the
> configuration?
>
__________ Informace od NOD32 2541 (20070920) __________
Tato zprava byla proverena antivirovym systemem NOD32.
http://www.nod32.cz
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
