[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] [xen-4.6-ARM][Renesas-Lager Board] Fail to enter rootfs on DOM0 after setting XEN

2015-11-10 23:18 GMT+09:00 Julien Grall <julien.grall@xxxxxxxxxx>:
> On 10/11/15 05:49, ììí wrote:
>> Hello,
> Hello,
>> I had tried to get Dom0 shell with simple initramfs. but it was not
>> working on xen.
> I'm afraid that I can't help you with only "It was not working ...".
> Please try to provide log, how did you build the initramfs, say if it
> works on baremetal...
Ok, I attach log files that are when boot each with initramfa and NFS
file system based on linux mainline linux4.3.
With Xen4.6.1
renesas_with_xen4.6.1_NFS_linux4.3  - using  NFS file system with tty
node "ttySC0"
renesas_with_xen4.6.1_initramfs_linux4.3 - using initramfs

Without Xen4.6.1
renesas_with_native_NFS_linux4.3 - using  NFS file system with tty node "hvc0"

>> In case of without-Xen, linux with similar setting(the difference is for
>> bootargs for dom0 and xen) is working well.
> It's not because Linux is booting on baremetal that it will necessarily
> boot on Xen.
> The behavior may be different because we may not map some regions or
> some code may not be executed in Linux anymore and we don't do it in Xen.
>> I hope, anvody help me to solve about "how to get the shell for DOM0 on
>> lager board"?
> First check your initramfs is working and baremetal and then with DOM0.
> The initramfs for the both case are exactly the same.
> Regards,
> --
> Julien Grall

Happy Virus....
Chang Hwan, Cho

Attachment: renesas_with_xen4.6.1_initramfs_linux4.3
Description: Binary data

Attachment: renesas_with_native_NFS_linux4.3
Description: Binary data

Attachment: renesas_with_xen4.6.1_NFS_linux4.3
Description: Binary data

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.