Re: [Wg-test-framework] Notes from Dec 10 meeting with AllNet

[Don Koch <dkoch@xxxxxxxxxxx>]

On Mon, 15 Dec 2014 15:32:49 -0500
"Paul L. George(Office)" <pgeorge@xxxxxxxxxx> wrote:

> Chris is making 26  to start but we are going to make 64 just to have the
> spares.

Wouldn't be easier to send the rest back and get the right thing?

-d

> -----Original Message-----
> From: Don Koch [mailto:dkoch@xxxxxxxxxxx] 
> Sent: Monday, December 15, 2014 2:33 PM
> To: Don Koch
> Cc: Ian Jackson; Lars Kurth; <wg-test-framework@xxxxxxxxxxxxxxxxxxxx>; Paul
> L. George
> Subject: Re: [Wg-test-framework] Notes from Dec 10 meeting with AllNet
> 
> On Mon, 15 Dec 2014 10:17:08 -0500
> Don Koch <dkoch@xxxxxxxxxxx> wrote:
> 
> > On Mon, 15 Dec 2014 14:27:39 +0000
> > Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> wrote:
> > 
> > > Don Koch writes ("Re: [Wg-test-framework] Notes from Dec 10 meeting with
> AllNet"):
> > > > On Mon, 15 Dec 2014 14:00:54 +0000
> [...]
> > > > These are documented on the Comtrol site. The only difference 
> > > > between the "standard" ones and the ones that Chris George made 
> > > > are that the standard ones would require a null modem adaptor. He 
> > > > just swapped the Txd/Rxd, DSR/DTR and RTS/CTS pins and left DCD out.
> > > 
> > > Null modem adapters are also available off-the-shelf.
> > > 
> > > If we are to continue to use custom-made adapters I think we 
> > > absolutely need a complete pinout specification.
> > 
> > Agreed. I've written up one which I want verified before we commit. 
> > Will send it when confirmed for inclusion in the git repository.
> > 
> 
> I've created the file db9-wiring.txt. Diff follows.
> 
> diff --git a/db9-wiring.txt b/db9-wiring.txt
> new file mode 100644
> index 0000000..b7b580a
> --- /dev/null
> +++ b/db9-wiring.txt
> @@ -0,0 +1,37 @@
> +Wiring for comtrol RJ45 to female db-9.
> +
> +RJ45 pinout
> +
> +1 RTS
> +2 DTR
> +3 signal ground
> +4 Txd
> +5 Rxd
> +6 DCD
> +7 DSR
> +8 CTS
> +
> +Standard 9-pin
> +
> +1 DCD
> +2 RxD
> +3 Txd
> +4 DTR
> +5 signal ground
> +6 DSR
> +7 RTS
> +8 CTS
> +9 RI
> +
> +Wiring from RJ45 to flipped (modem) 9-pin:
> +
> +Signal RJ45  DB-9
> +RTS      1    8
> +DTR      2    1,6
> +Gnd      3    5
> +TxD      4    2
> +RxD      5    3
> +DCD      6    -
> +DSR      7    4
> +CTS      8    7
> +
> 
> 
> _______________________________________________
> Wg-test-framework mailing list
> Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
> http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework
> 

_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework