[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] VGA Passthru - FLR?

Unfortuntely, XCP is not so easy to install on Fedora.

One thing I noticed: kernel 3.8.1 has some improvements regarding Power Management and Reset functions as well. I'll head this way (downloading kernel, set it and installing).

Current version my dom0 is running: 3.6-10.

Thx for the help

On Mar 7, 2013 10:53 AM, "Gizmo Chicken" <gizmochicken@xxxxxxxxx> wrote:


Okay.  Good to know you are certain that IOMMU is activated.

Like I wrote before, GPU passthrough is pretty easy to set up in XCP 1.6 when used in conjunction with XenCenter.  And by "pretty easy to set up in XCP 1.6 when used in conjunction with XenCenter," I mean select your GPU from a drop-down menu kind of easy.  So you might want to back up your current system (or swap out your hard drive) and install XCP 1.6, in conjunction with XenCenter, as a test.  If GPU passthrough doesn't work for you in XCP 1.6 (which relies on Xen 4.1), then you probably have some other hardware problems that you need to straighten out.

One note:  My system has UEFI, but I have found that things work much better when I force to boot into "comparability mode" at all times.  So if you have UEFI, you might want to try that, regardless what dom0 you select.

Best of luck!


On Thu, Mar 7, 2013 at 6:19 AM, Guilherme Suzuki <suzuki.gui@xxxxxxxxx> wrote:
> Gizmo, I've g...

Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.