[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Issues Booting DomU on TI DRA72 Chip



On Thu, 2015-07-09 at 09:55 -0400, Brandon Perez wrote:
>     I also noticed the following line during the Dom0 guest boot:
> 
> (XEN) Generic Timer IRQ: phys=35 hyp=31 virt=32 Freq: 6147 KHz
> 
>     Is this expected to be different from the expected interrupt ID's 
> for ARM core timers (these numbers are all offset by +5)?

That does seem odd, in particular because PPIs are in the range 16..31
inclusive, so it looks like you phys and virt timer interrupts are SPIs,
which is unexpected and I'm not sure if/how it will work.

These numbers I believe come basically direct from the device tree.
Could you provide the DTB which you are using for your platform, or even
better the DTS source.

Ian.



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.